716235

Blaupunkt RAMK 750302 Manual

13
Zoom out
Zoom in
Previous page
1/20
Next page
OPERATING
The mains voltage (230-240V~) indicated on the rating plate must correspond with the mains power supply. Mains connection fuse:
min. 10A.
1. Insert the mains plug of the unit connection cable into the combined switch /plug.
2. Secure with the cable grip. The loop of the mains cable must be adequately long so that the cable grip can slide from one side
to the other.
Switching on the motor
3. Press the On button on the combined switch/plug. Hold down the on button.
4. Pull the safety level against the handle and hold in position – the safety level does not lock into position.
5. Release the On button.
While mowing, lay the connection cable safety on footpaths and on areas which have already been mown. Switching on the motor
1. Release the safety level. The safety lever automatically returns to the zero position.
WARNING: When the motor has been switched o, the cutter continues running for several seconds – therefore do not touch
the underside of the mower until the cutter has come to a standstill. NOTE: Before switching on the unit, always check the
connection cable for signs of damage; only an undamaged connection cable may be used. Damaged connection cables are
highly dangerous
MOWING
1. Before starting the machine adjusts the lawn mower to the cutting height you need. (Refer to section on Lawn Mower Height
Adjustment) 2. Your lawn mower is equipped with a safety switch. To operate the switch, press the lock button then grasp the start
lever to start running. 3. The power will be o when the start lever is released. To start the mower, repeat do step (2) above.
• MOWING PROCEDURE The key to successful electric lawn mowing is a systematic approach to cutting.
Take a few moments to plan your first cut using the principles described here.
After one or two uses you will find the simplest way of cutting your own particular lawn.
1. Lay cord on ground near outlet in neat, loose coils with mower end of cord on top. It is important to arrange cord systemati-
cally to avoid annoying loops and knots.
2. Starting at point nearest electrical outlet, move back and forth across lawn.
3. Each lawn with its trees, shrubs, and other obstructions requires a different mowing procedure. A little experimenting will
enable you to choose the easiest method of handling the cord on your lawn.
EMPTYING THE GRASS BOX
1. When the grass box is full. Switch off, disconnect the mower from mains supply and wait until blade has come to standstill.
2. Take the handgrip of collection box (13)
3. Lift the grass box backwards.
4. Empty the grass box
WARNING: When the motor has been switched on, the cutter continues running for several seconds-therefore do not touch
the underside of the mower until the cutter has come to a standstill!
!
!
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt RAMK 750302 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt RAMK 750302 in the language / languages: English, German as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info