716234

Blaupunkt RAMK 750301 Manual

17
Zoom out
Zoom in
Previous page
1/20
Next page
WARNING: Unbalanced blades will cause the lawnmower to vibrate-risk of accident!
1. Disconnect the mower from power supply before removing or refitting the blade.
2. Turn the mower unit on to its side.
3. Firmly grip the end of the cutting blade - with a gloved hand.
4. Remove the fixing bolt, with the spanner provided.
5. Carefully remove the cutting blade.
6. Ensure that the ‘New’ cutting blade is the correct way up, with the turned edges facing towards the motor.
7. Locate the ‘New’ blade into position on the carrier pins. The blade with texts should face outward.
8. Secure the fixing bolt and tighten.
9. Return the mower unit to an upright position.
POWER SUPPLY CABLE
Before use, the power supply cable should be inspected for signs of damage or ageing.
DO NOT USE ANY POWER TOOLS IF THE CABLE IS DAMAGED OR WORN.
NOTE: All electrical inspections and repairs should be conducted by a qualified electrician.
STORAGE FOR LONGER PERIODS
NOTE: To ensure your mower is maintained in good working order, if the storage period exceeds one month it is important
that the following is adopted:
1. Clean all areas of the mower, ensure that the grass collection box is empty and clean.
2. Lubricate the wheels, pivot points and linkagesn.
3. Cover all metal parts with oil to prevent corrosion.
4. Cover the mower with a protective sheet and store in a dry area.
NOTE: Switch off the machine, unplug the power cord and wait until all moving parts have completely stopped before cleaning
and/or maintenance.
• Do not flush the machine with water.
• The penetration of water can damage the electrical parts.
• Clean the machine with a dry cloth, brush or the equivalent.
NOTE: Have the machine checked by an authorised service centre if:
–– The lawn mower blade strikes an object. –– The motor suddenly stops.
–– The blade is bent (do not attempt to straighten it).
–– The motor shaft is bent (do not attempt to straighten it).
–– There is a short-circuit/electrical fault when the power cord is plugged in. –– The gear or drive is damaged.
–– The V-belt is damaged.
SHARPENING/REPLACING THE BLADE
The blade should be checked and if necessary sharpened and/or balanced at the end of the season by a qualified person.
The insulation on the machine should also be checked in conjunction with removing the blade at the end of the season.
Storage
Clean the machine well on completion of the work. Allow the motor to cool before putting the machine away. Store the machine in
a dry place.
The machine will take up less space if the top handle is folded down. Unscrew the wing nuts about 6 turns.
IMPORTANT: Make sure the power cord is not clenched when folding down the handle.
!
!
!
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt RAMK 750301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt RAMK 750301 in the language / languages: English, German as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info