716234
14
Zoom out
Zoom in
Previous page
1/20
Next page
ASSEMBLY
HANDLEBAR (Fig. 1, 2)
1. Assemble the upper handlebar (4) to the lower handlebar (3) with the handlebar securing knob (5), washer (10) and bolt (11).
2. Insert the two lower handlebar tubes into the holes on main body, and fix the with lock screw (12) and washer (13).
GRASS COLLECTION BOX (Fig. 3)
1. Align the rear of the grass collection box-upper (2a), with the rear of the grass collection box-lower (2b).
2. Ensure that the locking tabs are aligned, and push together firmly, use of a pair of pliers may make this easier.
3. Repeat this alignment of locking tabs on both the right hand and left hand sides of the collection box, firmly pushing the
locking tabs together.
Fig. 1 Fig. 2 Fig. 3
Fig. 4
ATTACHING THE GRASS COLLECTION BOX (Fig.4)
1. Ensure that the grass collection box has been assembled correctly.
2. Lift the rear deflector (8) on the mower deck.
3. Pass the collection box under the handlebar, align the attachment hooks and
place the collection box into position.
4. Lower the rear deflector, so that it now rests on the grass collector box.
OPERATION
ADJUSTING THE CUTTING HEIGHT
NOTE: Stop, release switch lever and wait until the motor stops before adjusting height. The blades continue to rotate for a few
seconds after the machine is switched off, a rotating blade can cause injury.
For the first cut of the season, a high cutting adjustment should be selected.
The cutting height can be selected among 20mm, 40mm, or 60mm by adjusting the front and rear wheels.
Front wheel adjustment (Fig.5)
Pull the front wheel axle on either side of the mower deck in turn and relocate it in the required position.
Rear wheel adjustment (Fig.6)
Pull the rear wheel axle along the slot and lift the wheel, then relocate it in the required position.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt RAMK 750301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt RAMK 750301 in the language / languages: English, German as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info