Manual Blaupunkt Opel Car300 (page 7 of 14) (English)

36714

Zoom out

Zoom in

1/14

tune in the frequency offering best reception

of the programme.

Displaying the frequency of an

RDS station

In order to read the broadcasting frequency

of an RDS station from the display, press the

RDS button < until the frequency is

displayed. The radio will return to the station

name after approximately 10 seconds.

Regional programmes

Certain RDS radio programmes are split up

at times into regional programmes offering

local information. If you are listening to one

programme and move to an area where

another linked regional programme

becomes stronger, the unit will switch to that

programme. If you wish to continue listening

to the first station, switch on the regional

function:

Store the station on a preset button. Then

press the preset button for approximately 5

seconds until „REG-ON“ appears in the

display.

To switch off the function:

Press the corresponding preset button for

approximately 5 seconds until the display

shows „REG-OFF“.

When turning the unit on, the display will

briefly show „REG-ON“, if activated. „REG-

OFF“ will not be displayed.

Traffic Programmes

(TP = Traffic Programmes)

TP stations are FM RDS stations offering

traffic information. If such a station is tuned

in, “TP” will appear in the display.

Switching on TP

The unit will only receive TP stations.

Press the UML button 7 to select FM.

Then press the TP button ;, “[TP]” will

appear in the display. The display will show

“[ ]” during the seek tuning process or if a

TP station cannot be received.

When TP is active, traffic reports will

interrupt tape operation.

TP can also be switched on during tape

operation. In this case the programme name

of the currently selected station will be

shown in the display for 5 seconds.

If a station not providing traffic information

was tuned in before or selected with a

preset button, memory seek tuning will

automatically start in order to tune into the

strongest traffic programme station.

As long as the selected station remains

tuned in, the system will not switch to

automatic TP seek tuning even if the

reception gets worse.

While TP is active, when pressing the AS

button 9 (AS = automatic storing of

stations, see page 20) until a beep is

released, the system will switch to a preset

position with a traffic station as soon as the

storing process has been completed.

If the TP function is switched on, seek

tuning will remain active until at least one TP

station has been found.

If TP is active or if it is switched on while

listening to a tape, the set will automatically

start searching for the strongest traffic

programme station as soon as the reception

area of the tuned in station is left.

Switching off TP

Press the TP button again. “[ ]” disappears

from the display.

While a traffic message is being played,

press the TP button twice to switch off the

function.

When storing stations on the preset buttons,

“TP on” or “TP off” will not be stored as well.

Traffic Announcement volume

(TA)

The traffic announcement volume can be

separately adjusted in addition to the normal

playback volume.

Adjustment:

Press the TP button ; for more than 3

seconds. The TA volume level will be

displayed after the beep (e.g. TP-VOL-3).

BA Opel CAR 300 gb® 25.06.2002, 13:01 Uhr19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt Opel Car300 in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blaupunkt Opel Car300 Manual

Product: