614678
9
Zoom out
Zoom in
Previous page
1/26
Next page
London RDM 104
32
Adjusting the balance and fader
You can alter the volume relationship bet-
ween the loudspeakers on the left and right
(balance).
If you have connected four loudspeakers to
this system, you can also regulate the volu-
me relationship for front and rear (fader).
Activate the balance and fader function with
the AUD button.
Press the AUD button twice.
Either BAL (balance) or FAD (fader) and a
number between -9 and +9 will appear in the
display.
In order to adjust the balance (right/left)
press the rocker switch <</>>.
In order to adjust the fader (front/rear)
press the rocker switch
/ .
The number in the display will change accor-
dingly between -9 and +9. It will automatically
stop at 0 (same volume relationship between
left and right or front and rear).
Finish making the new setting by pressing
the AUD button; otherwise the display will
return to radio or CD mode approximately 8
seconds after the last adjustment has been
made.
The radio will switch on and after one hour it
will switch off again automatically.
You can switch the radio on again for one
hour as often as you like.
“Beep” sound after pressing a
button
Functions which require you to press any
button for longer than 2 seconds to store the
information can be confirmed acoustically by
a beep. The factory preset volume of the
beep can be adjusted in DSC mode under
BEEP using the rocker switch <</>>. You
can store different values for this setting
separately on KeyCard 1 and 2.
Adjusting the volume
To adjust the volume
press the VOL+ button to increase or
the VOL- button to decrease the volu-
me.
The display ranges from 0 to +63.
If you have set a relatively loud volume and
would like to reduce it immediately,
press the -dB button. MUTE will then
appear in the display.
If you want to reset the original volume, then
press the -dB button again briefly or the
VOL+ button.
In order to alter the MUTE value (display
MUTE),
first press the VOL- button.
Set the desired volume using either the
VOL+ or the VOL- button.
In order to store this new setting
press the -dB button for longer than 2
seconds.
After a short period the display will switch to
either radio or CD mode once again.
Adjusting the basic volume
You can program your radio so that it will
switch on at a certain volume.
Use the VOL FIX function in the DSC mode
(Direct Software Control).
Press the DSC button and then the
rocker switch
.
VOL FIX will appear in the display.
Set the desired volume using the rok-
ker switch <</>>.
In order to store this setting
press the DSC button.
The radio will switch back to the original
volume setting first.
Turn it off and on again once to obtain the
new setting.
You can store different values for this setting
separately on KeyCard 1 and 2.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt London RDM104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt London RDM104 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt London RDM104

Blaupunkt London RDM104 Installation Guide - English, German - 13 pages

Blaupunkt London RDM104 User Manual - German - 26 pages

Blaupunkt London RDM104 Installation Guide - Dutch - 13 pages

Blaupunkt London RDM104 User Manual - Dutch - 27 pages

Blaupunkt London RDM104 Installation Guide - French, Italian, Portuguese, Spanish - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info