165684

Blaupunkt helsinki rtm 127 Manual

9
Zoom out
Zoom in
Previous page
1/28
Next page
- 9 -
• Installing the antenna
A wide range of different antennas is available in the market.
Combination antennas, for example, are an
interesting solution.
For more information please contact your Bosch dealer.
Radio antenna
In new vehicles with antenna prefitting, e.g. VW, Seat, Audi, the power
is supplied to the antenna via the antenna cable (see user manual of your
car). If you wish to replace the original equipment for a conventional car
radio, you need to purchase an antenna duplexer (P/N 7 691 290 202)
from your specialist dealer. Information on how to install and connect
your antenna is provided in the antenna installation instructions. Accor-
ding
to the antenna type you wish to install, it may be necessary to use the
antenna adapter with holder included in the delivery (see Fig. 3a).
Telephone antenna
The Telephone ariel (GSM) shold be installed to 1m- distance from radio
one. After you have installed the antenna, tighten the connection at your
car radio by hand und add another 1/4 rotation using pliers.
Note: Make sure the telephone wires are not routed close to the
loudspeaker wiring.
• Installing the car radio
Install your car radio into the car radio compartment of your car.Uncover
the radio compartment (remove the shelf or the dummy panel) or cut the
car radio slot to a size of 182 x 53 mm. For the most common cars with
deviating installation places Blaupunkt offers specific 50-mm car radio
installation kits. Therefore, please check the car radio installation place
in your car. If required, use one of our car-specific installation kits.
Car radio sleeve or remote control installed in your
car
If your vehicle is equipped with a specific car radio mounting sleeve (e.g.
Opel), it is necessary to remove the original sleeve. Steering wheel
remote controls installed in some vehicles can be adapted by means of
an interface. Contact your specialist dealer for more information.
Installing the mounting sleeve
The mounting sleeve included with this car radio is designed for instal-
lation in vehicles with standard DIN installation compartment measuring
182 x 53 mm, 165 mm installation depth and a dashboard thickness of
1 to 20 mm in the area of the tab fasteners (see Fig. 1).Insert the car radio
into the sleeve and check which tabs on the sleeve can be bent with the
help of a screwdriver (see Fig. 1 and 2).
Note: Bend as many taps as possible.
Installing the car radio
Insert all connectors into the chambers until the side catches engage.
Place the car radio in the front of the sleeve and push it in gently on both
ends of the sleeve until the left and right side springs snap into place (you
will hear an audible click), see Fig. 3.
Advantage! Do not push on the display, keys or switches!
Removing the car radio
Insert the handles into the holes in the panel on the left and right side of
the radio and push them in until you hear an audible click (the side springs
unlock). Gently pull the unit out using both handles (see Fig. 3).
Note: Handles which have snapped into place can only be removed
after you have pulled the radio out of the compartment.
Connecting diagrams
Vehicles without car radio prefitting (page 10) .......................... Fig. 4
Power supply to standard ISO connectors (page 5) ................. Fig. 5
Power supply to car-specific connectors (page 5) .................... Fig. 6
PIN 2
Mounting and connection hardware included in the delivery
Loudspeaker connection 4x 4Ω/35 watts (page 5) ................... Fig. 7
Equaliser or amplifier connection (page 5) ............................... Fig. 8
LF = left front, RF = right front
LR = left rear, RR = right rear
Handsfree microphone connection (page 6) ............................. Fig. 9
Handset connection (7 607 570 512) (page 6) ......................... Fig. 10
CD player connection (CDC A06/072) (page 6)........................ Fig. 11
IR remote control connection (RCT 07) (page 7) ...................... Fig. 12
CD player connection (CDC-A05/071) (page 7) ....................... Fig. 13
CD player connection (CDC-F05) (page 7) ............................... Fig. 14
8 622 401 055
Fig.3a
Fig.2
Radio antenna
Telephon antenna
8 601 910 002
2
2
1
1
Fig.3
53
182
165
8 601 310 742
1-20
Fix the guide pin with or without spacer
on the stud at the car radio rear side.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt helsinki rtm 127 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt helsinki rtm 127 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt helsinki rtm 127

Blaupunkt helsinki rtm 127 User Manual - English - 68 pages

Blaupunkt helsinki rtm 127 User Manual - German - 69 pages

Blaupunkt helsinki rtm 127 User Manual - Dutch - 65 pages

Blaupunkt helsinki rtm 127 User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info