698856
7
Zoom out
Zoom in
Previous page
1/80
Next page
5
1. Body
2. Mincing-tube-release button
3. Mincing-tube-locking unit
4. Power-on button
5. Slow button
6. Rev button
7. Pusher
8. Feeder tray
9. Mincing tube
10. Screw conveyor
11. Blade
12, 13, 14. Mincing discs 3, 5 & 7mm
15. Securing ring
16. Sausage-maker attachment
ASSEMBLY
1. Insert the mincing tube (9) into the locking unit (3). Swivel the neck of the mincing tube clockwise,
fit the lugs in place, and lock by swivelling the tube (9) anticlockwise.
2. Slot the screw conveyor (10) into the mincing tube and fit it into the motor gear.
3. Attach the blade (11) to the end of the screw conveyor.
4. Fit the required mincing disc (12-14), fitting the lugs into the grooves.
5. Tighten the securing ring (15).
6. Mount the feeder tray (8).
When using as a sausage-maker attachment, place it between a mincing disc and the securing ring.
USE
1. Assemble the Meat Mincer.
2. Connect the power supply.
3. Use the Power-on button to start the Mincer.
4. Feed in the products to be minced by placing them on the feeder tray and moving them with the
pusher into the mincing tube. Avoid applying too much pressure on the pusher to allow the screw
conveyor to move the products gradually into the mincing tube.
Note: if products get stuck inside the mincing tube, turn off the Mincer and use the Rev button to draw
the products in the mincing tube back in the opposite direction. If the products are still stuck, turn off
the Mincer and unplug it to empty the mincing tube.
Note: when using as a sausage-maker attachment, using the Slow button for the lower speed is
recommended.
CLEANING AND MAINTENANCE
Make sure the appliance has been disconnected from the power source.
Clean the body (1) with a mildly damp cloth, and then wipe it dry. Do not submerge the body in water
or other liquids.
All parts, except for the body (1) with the motor, are suitable for cleaning with water and washing-up
liquid.
FMM501
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt FMM501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt FMM501 in the language / languages: English, German as an attachment in your email.

The manual is 15,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info