698490
9
Zoom out
Zoom in
Previous page
1/88
Next page
7
1. Display
2. Control Panel
a) Power Button
b) Mode Switch
c) Timer Button
d) Eco Button
e) Oscillation Button
f) “” Button
g) “+” Button
3. Main Switch
4. Base
OPERATION
Preparing the device for operation: ensure that the Main Switch is set to OFF; connect the device to a
power supply; switch the device ON using the Main Switch. The device emits an acoustic signal. The
stand-by indicator lights up; the device enters stand-by mode.
Press the Power Button to switch on the Fan Heater. The Fan Heater will start operating in the most-
recently used mode.
Press the Mode Button to change the mode of operation:
1. Freezing Protection : the Fan Heater will keep the temperature in the room above 7°C to prevent
freezing.
2. Fan : the Fan Heater will operate as a fan only.
3. Warm Air
4. Hot Air
5. Very-Hot Air
The Fan Heater attempts to maintain the desired temperature by turning the heat on and off.
The desired temperature can be set by pressing + and .
To switch off blowing or heating, press the Power Button . The Fan Heater goes into sleep mode after
counting down from 30.
To completely switch off the device, set the Main Switch to OFF and remove the plug from the socket.
Oscillation: to activate the oscillation function, press the Oscillation Button .
ECO: the heating power will be adjusted to the ambient temperature and the desired temperature. The
device sets its heat intensity based on the difference between the ambient temperature and the
desired temperature. The device automatically changes its heating mode during operation to reduce
power consumption and provide optimum comfort. Press the Eco Button to activate the Eco mode.
Press the button again to deactivate the Eco mode.
Timer:
The unit can be preset with the delay switch and on and off timer.
To program a delayed start, press the Timer Button when the device is in the sleep mode. Set the
time by pressing + and ”: 0.5 hr. (30 minutes), 1 hr., 3 hrs., ..., 24 hrs. The selected time is stored after
2 seconds.
Press the Timer Button while the Thermal Fan is in operation to program the device to shut down
and enter the sleep mode. Set the timer by pressing + and : 0.5 hr. (30 minutes), 1 hr., 3 hrs., ..., 24
hrs. The selected time is stored after 2 seconds.
The preset time can be adjusted by pressing the Timer Button and +” and or switched off
completely by pressing the Timer Button twice.
CLEANING AND MAINTENANCE
Before cleaning the heater make sure that it has been switched off, unplugged from the power socket.
Make sure the device has cooled down sufficiently.
Air inlets and outlets should be free of dust. Clean with dump cloth and wipe dry.
FHD501
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt FHD501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt FHD501 in the language / languages: English, German, Polish as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info