698497
8
Zoom out
Zoom in
Previous page
1/158
Next page
CAUTION:
When driving for the first time, drive the electric
hoverboard with the support of another person to
prevent from falling down or losing a balance.
Steering elements
Pedal sensors
The electric hoverboard is equipped with four sensors underneath each foot pedal, that help to
automatically balance the hoverboard while entering on.
Do not go beyond the edge of the pedals, note that your foot should be on the pedal while driving.
Do not place any baggage on the pedal, the sensor will detect weight and hold the hoverboard in
on mode. This increases the likelihood of a collision, causing injury to the driver or damage to the
hoverboard.
Function indicator
The function indicator is located in the middle of the electric hoverboard and is used to display
current information.
A The LED display shows the battery-charge level. When the indicator light is green for the EHB810
model, or blue for the EHB608 model, the device battery-charge level is sucient. When the
indicator turns red for the EHB810 model and the blue indicator starts flashing for the EHB608
model, and a sound signal is heard in the case of both models, begin charging the board as soon as
possible. Before each use, check the current battery-charge level to make sure that the board has
enough power for the return journey. The board can be charged after each use.
On both models, when the battery level is less than 15%, the LED indicator will begin flashing, and a
sound signal will be heard.
B The current-information display area: when the rider is standing on the pedals and the sensors are
activated, the signal light will show up blue for the EHB608 model or green for the EHB810,
indicating that the board is in working mode. If there is any system error, the signal light on the
EHB810 model will turn red and the blue light on the EHB608 will begin to flash. A sound signal will
also be heard, on both models.
Function indicator A
Function indicator B
Hoverboard housing
Tyre
Power supply socket
On/Off button
Speaker
LED Lights
Anti slip pedal
6
EHB608/EHB810
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt EHB608 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt EHB608 in the language / languages: English, German, Polish as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info