647241

Blaupunkt DC-S2 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
DC-S2
FRANCAIS
Contact d’ouverture de
porte/fenêtre
Suivre les instructions de cette notice
pour enregistrer et utiliser le détecteur ;
pour plus de détails, voir les images
sur la droite.
Enregistrement
1. Retirer la languette de protection
pour activer la pile. (Figure 1)
2. Mettre la centrale en mode
Enregistrement.
3. Appuyer sur le bouton
d’enregistrement. (Figure 2)
4. Se référer à la notice de la centrale
pour finir l’enregistrement.
Emplacement
Installer le détecteur sur le cadre
fixe de la porte/fenêtre et l’aimant
sur la porte/fenêtre.
Installer le plus haut possible.
Ne pas installer un détecteur de
mouvement à cette porte/fenêtre.
Ne pas installer sur des surfaces
métalliques.
Installation
Avant installation, mettre la centrale en
mode Test et appuyer sur le bouton
d’enregistrement du détecteur, une fois
à son emplacement, pour tester la
portée du signal.
Installation à vis :
1. Dévisser la vis du bas pour ouvrir le
détecteur. (Figure 3)
2. La face arrière a 2 pré-trous de
fixation. (Figure 4)
3. Percer les pré-trous ; marquer
l‘emplacement sur le cadre de
porte/fenêtre en utilisant les
pré-trous comme repère. (Figure 5)
4. Si nécessaire, percer des trous à
l’emplacement marqué et insérer
des chevilles. (Figure 6)
5. Visser la face arrière sur le mur à
l’emplacement prévu. (Figure 7)
6. Refermer le détecteur. (Figure 8)
7. Visser l’aimant tout en l’alignant
avec le repère sur le détecteur.
(Figures 9&10) L’écart entre
l’aimant et le détecteur ne doit pas
dépasser 15 mm.
Installation avec la bande
adhésive
Il est possible d’utiliser la bande
adhésive double face pour fixer
l’aimant et le détecteur mais nous vous
recommandons de le visser.
PORTUGUÊS
Porta / Janela Detector
Siga as instruções neste documento
para instalação e uso do acessório.
Para mais configuração e detalhes de
operação, por favor visite o site
Blaupunkt http://www.blaupunkt.com
para baixar o manual completo.
Começando
1. Retire o isolador da bateria para
ativar bateria. (Figura 1)
2. Coloque el panel de control en el
modo de aprendizaje.
3. Imprensa Saiba Button em frente
ao saber do sensor (Figura 2).
4. Consulte o manual do painel de
controle para concluir o processo
de aprendizagem.
Local de Montagem
Monte o corpo principal do
detector na moldura da porta /
janela, eo ímã na porta / janela.
Montagem o mais alto possível
Não aponte um Movimento
Detector PIR neste porta / janela.
Não monte na superfície metálica.
Instalação
Antes da instalação, colocar o Painel
de Controle no modo Walk Test e
pressione o botão de programação no
detector no local de montagem para
testar o alcance do sinal
Parafuso de montagem:
1. Remova o parafuso na parte
inferior do corpo principal detector
de virar abra a tampa. (Figura 3)
2. A tampa traseira tem 2 aberturas
para a montagem. (Figura 4)
3. Romper os nocautes; marcar o
local de montagem na moldura da
porta / janela usando o nocaute
como modelo. (Figura 5)
4. Se necessário, fazer furos em local
marcado e inserir ficha de parede.
(Figura 6)
5. Parafuso da tampa de volta para o
local de montagem. (Figura 7)
6. Recoloque a tampa frontal na base.
(Figura 8)
7. Aperte o íman para a porta, o ímã
deve estar alinhado com as marcas
das costelas no corpo principal.
(Figura 9 e 10) A diferença entre o
corpo principal eo íman deve ser
não mais do que 15 mm.
Montagem Adesiva
Você também pode usar a fita adesiva
dupla face incluído no pacote para
montar o detector e ímã.
Figure 1 / Figura 1
Figure 5 / Figura 5
Figure 2 / Figura 2
Figure 6 / Figura 6
Figure 3 / Figura 3
Figure 4 / Figura 4
Figure 7 / Figura 7
Figure 8 / Figura 8
Figure 9 / Figura 9
Figure 10 / Figura 10
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt DC-S2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt DC-S2 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info