614241
7
Zoom out
Zoom in
Previous page
1/52
Next page
CRP8BK / CRP8WH
6
INSTALLATION
Plug the AC/DC adaptor to an AC household outlet, and then plug the DC jack to the back
of the unit. Your clock radio is ready to work for you.
BACKUP BATTERY INSTALLATION
Your clock radio requires one CR2032 lithium battery (not included) to provide backup
power to the clock in the event of a temporary power interruption.
1. Place your unit face down on a flat surface.
2. Slide and remove the battery cover at the bottom of your unit.
3. Insert one new CR2032 lithium battery into the battery compartment with the “+” side
facing up as indicated.
4. Replace the battery cover.
If AC power is interrupted, the LED display will go off and both the radio and the alarm
will not function. The backup battery will keep the time and all settings of your unit.
Make sure a fresh CR2032 lithium battery is used. A fresh CR2032 battery could backup
your clock continuously.
SETTING TIME, 12/24HR TIME AND THE SNOOZE DURATION
1. Press SET once, the hour digits flash. Press Ʒ or ͩ to set the current hour (hold to
advance rapidly).
2. Press SET again, the minute digits flash. Press Ʒ or ͩ to set minutes.
3. Press SET again, the display shows “24H” and flashes, press Ʒ or ͩ to select “12H or
“24H” time format.
4. Press SET again, the display shows “05” and flashes, press Ʒ or ͩ to select your snooze
time from 5 to 60 minutes.
5. Press SET again or if no key pressed for approx. 10 seconds to exit the setting mode.
Note: when 12-hour time format is selected, the P (PM) icon will appear on the lower
middle time display to indicate the afternoon time; there is no AM indicator.
SETTING THE ALARMS
1. Press AL 1.2 once, the 1 icon and the hour digits flash. Press Ʒ or ͩ to set the alarm 1
hours.
2. Press AL 1.2 again to adjust minutes. Press Ʒ or ͩ to set the alarm 1 minutes.
3. Press AL 1.2 again, LED displays “OFF” (alarm off). To select wake to sound sources, press
Ʒ or ͩ to select :-
rd = wake-by-radio
bu = wake-by-buzzer
OFF = alarm off
4. Press AL 1.2 again, the 2 icon and the hour digits flash. Press Ʒ or ͩ to set the alarm 2
hours.
5. Repeat step 2) and 3) to set alarm 2.
6. Press AL1.2 again or no button around 10 seconds to exit alarm setting mode. When
wake-to-radio or wake-to-buzzer is selected, the related alarm is turned on, indicated by
appearance of the 1 and / or the 2 icon on the left side of the display.
ENGLISH
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt CRP8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt CRP8 in the language / languages: English, Polish as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info