614597

Blaupunkt Concept Pro II Manual

22
Zoom out
Zoom in
Previous page
1/264
Next page
22
Safety notes | Cleaning notes | Disposal notes | Scope of delivery | Placing the device in operation
Declaration of conformity
The Blaupunkt Embedded Systems GmbH de-
clares that the car sound system Birmingham
2012 complies with the basic requirements and
the other relevant regulations of the directive
2004/108/EC.
The declaration of conformity can be found on the
Internet under www.blaupunkt.com.
Cleaning notes
Solvents, cleaning and scouring agents as well as
dashboard spray and plastics care product may
contain ingredients that will damage the surface
of the car sound system.
Use only a dry or slightly moistened cloth for
cleaning the car sound system.
Disposal notes
Do not dispose of your old unit in the house-
hold trash!
Use the return and collection systems available to
dispose of the old device.
Scope of delivery
The scope of delivery includes:
1 Car sound system
1 Operating/installation instructions
1 Support frame
2 Disassembly tools
Optional equipment
(not part of the scope of delivery)
Use only accessories approved by Blaupunkt.
Information is available from your Blaupunkt
specialised dealer or on the Internet under
www.blaupunkt.com.
Placing the device in operation
Code protection
This car sound system is protected against theft
with a four-digit code number. You can specify
that the code number must be entered after every
interruption of the power supply from the vehicle
battery. With activated code query and without
this code number, the car sound system is useless
to a thief.
Notes:
• The code query is set to inactive at the
factory, but it can be activated (see the
chapter "User settings", section "Making
settings in the "VARIOUS" menu", menu
item "SEC CODE").
• The default setting of the code number is
"0000". The code number can be changed
(see the chapter "User settings", section
"Making settings in the "VARIOUS" menu",
menu item "CODE SET").
Entering the code number after a voltage
interruption
If the code query is activated, the four-digit code
number must be re-entered every time the device
is disconnected from the vehicle system voltage
(e.g. removal of the battery for repairs).
For each digit of the code number:
쏅 Press the
/ button
7
to set the current
digit.
쏅 Press the
button
7
to con rm.
Note:
When entering the code, you may return to a
previous digit by pressing the
button
7
.
After setting and con rming the fourth digit, the
car sound system is switched on.
Note:
If you enter an incorrect code number, "CODE
ERR" is brie y displayed and the device is
blocked for 99 seconds. Afterwards you can
retry the entry.
02_Birmingham2012_gb.indd 2202_Birmingham2012_gb.indd 22 07.08.12 10:5607.08.12 10:56
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt Concept Pro II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt Concept Pro II in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 10,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info