496883
29
Zoom out
Zoom in
Previous page
1/32
Next page
CLR 40
SETTING DUAL ALARMS FUNCTIONS
Notes
• Before setting the alarm time, make sure the Clock has been set
• Alarm can only be set in Clock mode only
• When setting the alarm to wake up by Radio, Radio station & volume level
will be the same as the last radio operation. (See “RADIO OPERATION").
The ALARM 1 (or Alarm 2) indicator flashes in the display when the alarm
sounds.
• Alarm 1 (or/and Alarm2) icon appears when the alarm activated, disappear
when disabled. See TO ACTIVATE / DISABLE ALRM section for the
operation
• If a second alarm sounds during a first (or the SNOOZE function is active for
the first), the second alarm takes priority.
• If both alarm set to the same alarm time. ALARM 1 takes priority.
To stop the alarm, please press the related alarm button (AL1 or AL2) once.
To set up Alarm 1 (or Alarm 2),
1. Press AL1 (or AL2) button to enter the alarm mode or for checking the
alarm status. If user does not begin setting or does not press any button
during the alarm setting within 5 seconds, the system will back to the Clock
mode automatically.
2. Alarm sound defaulted as Buzzer. During the alarm setting, user can press
the MODE button to select the alarm sound (Buzzer or Radio)
3. To set the alarm hour, press SCAN+ or SCAN- button until the desired
hour is reached.
4. Press AL1 (or AL2) to confirm
5. Repeat step 3 and 4 to set the desired minute is reached.
TO ACTIVATE/ DISABLE THE ALARM
Before or after setting the alarm time, follow these steps:
• To activate the ALARM 1 (or ALARM 2), press and hold AL1 (or AL2) button
for around 2 seconds the related alarm icon appears. To disable the alarm
press and hold the button for around 2 seconds the icon will disappear
SNOOZE SETTING
The snooze function can be used to stop the alarm temporarily for about 9
minutes once the alarm is activated. When the snooze button is pressed, the
buzzer or radio alarm sounds will stop and will sound again after about 9
minutes.
29
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt CLR 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt CLR 40 in the language / languages: English, German as an attachment in your email.

The manual is 6,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info