495652

Blaupunkt BT Drive Free 111 Manual

9
Zoom out
Zoom in
Previous page
1/56
Next page
16 17
ENGLISH
Switching BT Drive Free 111 on/o
Switch-on: With switched-o device.
Hold the MFB button pressed for approx. 3 seconds until you hear a short
sound. The blue LED is on for 3 seconds.
Switch-o : The device is in standby mode (switched on).
Hold the MFB button pressed for approx. 3 seconds until you hear a long
sound. The red LED is on for 3 seconds. Afterwards, the device is switched
o .
IMPORTANT: After every switch-on, brie y press the MFB button again to
establish the connection. The initial pairing is described below.
Pairing (connecting) with the cell phone
Before you can use the BT Drive Free 111, you must connect it with the
respective Bluetooth-ready cell phone (pairing). The following steps explain
the general procedure for pairing.
The distance between the two devices must be less than 1 metre.
The BT Drive Free 111 must be switched o .
Hold the MFB button pressed for approx. 6 seconds until you hear a long
sound. The LED starts to alternately  ash red and blue.
Activate the Bluetooth function on your cell phone and look for "Audio
accessories". (For further details, please read the operating instructions
your cell phone.)
Select "BT DF 111" from the displayed list.
Upon request to enter the PIN code, enter "0000" and con rm with "OK".
After successful pairing, you will hear a long sound and the LED is on for
approx. 3 seconds. The device is now in standby mode, which is indicated
every 3 seconds by the blue LED  ashing brie y. (Note: The PIN code is
preprogrammed and cannot be changed).
The range between cell phone and the device is limited to 10 m. The
shorter the distance, the better the connection.
IMPORTANT: If the pairing is not completed within 2 minutes, the LED goes
out and the device switches o again. In this case, start the pairing from the
beginning.
–
–
–
–
–
–
–
Re-pairing
After successful pairing, the BT Drive Free 111 is in standby mode. Before
making a phone call, ensure that the headphone icon on the display of your
cell phone is displayed, otherwise proceed as follows:
On the cell phone: In the Bluetooth menu, select "Paired devices", followed
by "BT Speaker" or "BT Drive Free 111".
On the BT Drive Free 111: Brie y press the MFB button and con rm (ac-
cept) it on your cell phone.
IMPORTANT: Always perform this brief activation if the headphone icon is
not shown (e.g. after extended switch-o of one of the devices or if you were
outside the range). (If your device supports automatic connection, brie y
pressing the MFB button is su cient.)
Exiting the connection to the cell phone
If you want to connect the BT Drive Free 111 with other cell phones, you must
rst disconnect this connection.
Switch o the BT Drive Free 111.
Select "Disconnect" on your cell phone.
IMPORTANT: If the connection is lost, the BT Drive Free 111 sends three
sounds every minute. After 10 minutes, the BT Drive Free 111 completely
switches o .
Using the BT Drive Free 111
After the pairing has been successfully performed and the battery has been
charged, the following functions can be performed:
Call answering
To answer a call, brie y press the MFB button or the answer button of
your cell phone.
Ending a call
Brie y press the MFB button or the end button of your cell phone.
Rejecting a call
Hold the MFB button pressed for approx. 3 seconds until you hear a
short sound.
Redialing the last number
In standby mode, press the MFB button twice.
–
–
–
–
–
–
–
–
02_BTDriveFree111_gb.indd 16-1702_BTDriveFree111_gb.indd 16-17 04.11.2010 9:13:25 Uhr04.11.2010 9:13:25 Uhr
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt BT Drive Free 111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt BT Drive Free 111 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 4,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info