Manual Blaupunkt BP2203 (page 13 of 60) (English, German, French, Italian, Polish, Portuguese, Spanish)

739054

Zoom out

Zoom in

1/60

Drill / Impact Switch (Fig 2)

The drill / impact switch (1) changes the drilling mode between

conventional drilling and impact for drilling concrete. To

operate the drill in drill mode, push the drill / impact switch to

the right (Fig 2A). To operate the drill in impact mode, push the

drill / impact switch to the left (Fig. 2B).

Fig. 2A

Fig. 3 Fig. 4

Fig. 2B

Installing Drill Bits (Fig. 3)

WARNING: Never hold the chuck body with one hand and use the drill power to rotate the drill body to loosen or tighten bits.

Serious injury may result.

• Remove drill plug from the power source.

• Rotate chuck collar (1) in a counter clockwise direction until the chuck jaws (2) open wide enough to accept the bit (3).

• Insert the bit into the chuck the full length of the jaws or until the spiral portion of the bit is near the chuck jaws. Raise the

front of your drill slightly to prevent the bit from falling out of the chuck jaws.

• Tighten the chuck jaws onto the bit by turning the chuck body in a clockwise direction.

• NOTE: Make sure the bit is properly aligned in the jaws and NOT at an angle. An improperly aligned bit could be thrown from

the chuck when the drill is started.

• Finish tightening the chuck jaws by inserting the chuck key (4) into one of three holes (5) in the chuck body. Rotate chuck key

clockwise until drill bit is held ﬁrmly in place by the chuck jaws.

Removing Drill Bits (Fig. 3)

• Remove the drill plug from the power source.

• Insert the chuck key (4) into one of the three holes (5) in the chuck body. Rotate the chuck key counter clockwise until the

chuck jaws release the drill bit

Trigger Switch Lock (Fig. 4)

The trigger switch lock-on feature allows the trigger switch to be locked in the ON position at full speed when continuous operation

for extended periods of time is required.

• To lock the trigger switch in the ON position, pull back on the trigger switch (2) to start the drill. Continue to squeeze the

trigger until the drill reaches its maximum speed. Push the trigger switch lock button (3) into the drill handle. Release the

trigger switch while holding the trigger switch lock button into the drill handle. The drill will continue to run at full speed.

• To release the trigger switch lock button, pull the trigger switch back and then release the trigger.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt BP2203 in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blaupunkt BP2203 Manual

Product: