614378
23
Zoom out
Zoom in
Previous page
1/35
Next page
BP Car Phone 3.0 C User Manual
23
9.6.2 Version
To find out the current software version for the telephone unit (TPU) and the handset select MENU >
SETTINGS > DEVICE > VERSION. Then choose either PTC (for the telephone unit) or HA (for the
handset). The software version always begins with PTC for the telephone unit and HA for the handset.
9.6.2.1 Firmware update
To update your device’s firmware and profit from constant development go to MENU > SETTINGS >
DEVICE > VERSION > PTC > UPDATE. After you have selected UPDATE you will be asked to enter
the device code. After entering the code the device establishes a GPRS connection and checks whether a
more up-to-date firmware version is available. “Checking version” will appear on the display. If a more
up-to-date firmware version is available this is automatically downloaded and installed onto your device.
Update running and a progress bar will appear on the display. The device then restarts. The whole
update process can take several minutes. If there is not a more up-to-date version available than the
one currently installed then the device displays “Software is up-to-date”.
TIP
:
You can cancel the update process at any time with CANCEL.
NOTE
:
If you receive the error message “Internet Connection Error” when trying to update then the
update server is not available or the GPRS settings are incorrect. Try the update again at a later time. If
necessary correct the internet settings (see section 9.9 Internet).
GPRS connections can generate extra charges. Please contact your service provider for more
information.
9.6.3 Delay timer
The delay timer determines the length of time before the phone automatically switches off if the phone
has been inactive and if the ignition has been turned off. This function can be useful to prevent the
device from switching off if the ignition is only temporarily turned off (e.g. when fuelling). The delay
timer is restarted whenever the phone is used again (when any key is pressed). If the phone is switched
on using the power key when the ignition is turned off and the delay timer is set to 0 minutes, the
phone will turn itself off again after 15 minutes (not editable). Again the delay time will be restarted
when any key is pressed.
Select MENU > SETTINGS > DEVICE > DELAY TIMER to set the delay timer and choose one of the
options: 0 MINS (phone switches off when the ignition is turned off), 5 MINS, 15 MINS, 1 HR, 2
HRS, 4 HRS, 8 HRS, 12 HRS, 1 d, 7 d, 10 d or 30 d (MINS = Minutes; HR = Hours; d = Days).
NOTE:
This setting will not work if, contrary to the installation instructions, the ignition is connected to
the permanent positive!
9.6.4 Answering by lifting the handset
Select MENU > SETTINGS > DEVICE > ANSWER BY LIFTING HANDSET to choose whether you
want to answer a call simply by removing the handset from the holder. You have the option of selecting
ON or OFF.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt BP Car Phone 3.0 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt BP Car Phone 3.0 C in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt BP Car Phone 3.0 C

Blaupunkt BP Car Phone 3.0 C User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info