614192
35
Zoom out
Zoom in
Previous page
1/40
Next page
XLf 200 A
35
Evo još nekoliko važnih objašnjenja:
Okretanjem regulatora u smjeru kazaljke na satu povećava
se osjetljivost ulaza pojačala a time i jačina zvuka. Pritom nije
samo riječ o regulaciji jačine zvuka; u krajnjem položaju se
ne može postići veći učinak pojačala, čak iako se to tako čuje.
Sustav samo brže povećava jačinu zvuka kada se regulacija
jačine zvuka autoradija okrene do kraja.
CROSSOVER reguliranje frekvencije
CROSSOVER reguliranje 5 omogućuje podešavanje željene
ulazne frekvencije.
Primjer:
Kod postavke od 150 Hz pojačalo ima frekvencijsko područje
od 20 Hz do 150 Hz.
Postavke
Kao osnovne postavke prije stavljanja u pogon preporuču-
jemo sljedeće položaje regulatora: Osjetljivost (VOL) pol.
4
na minimum, faza (PHASE) pol.
6 na 0°,  ltar (CROSSOVER)
pol.
5 na ca. 80 Hz. Uključite uređaj i odaberite glazbeni
komad s izraženom reprodukcijom basa.
Pojačajte glasnoću na Vašem stereo uređaju do željene
razine glasnoće zvuka. Zatim regulator osjetljivosti
4
oprezno okrećite dok ne začujete jasno pojačavanje razine
basa. Zatim regulatorom  ltra 5 odaberite postavku  ltra,
kojom se postiže dobar kontinuirani bas. Možda ćete morati
naizmjence optimirati postavku regulatora osjetljivosti
4
i postavku  ltra
5.
Brujeći bas s prenaglašenim volumenom zahtijeva postavku
ltra s nižom frekvencijom.
Fazni regulator
6 valja podesiti tako da se bas što bolje
integrira u sliku zvuka i da se ne čuje kao samostalni izvor.
Svoje postavke XLf 200 A provjeravajte i s do kraja okrenutim
regulatorom basa te eventualno uključenom Loudness (gla-
snoćom). Prejako pojačavanje subwoofera (poz.
4) dovodi
do isprekidane reprodukcije i može uništiti zvučnik.
Prikaz radnog stanja (PRT/PWR)
Zeleno svjetlo:
Krajnji stupanj, regularni prikaz radnog stanja.
Crveno svjetlo:
Krajnji stupanj je elektronski isključen, budući da postoji
pogreška.
Recikliranje i zbrinjavanje
Molimo Vas da za zbrinjavanja proizvoda koristite
sustave vraćanja i skupljanja koji vam stoje na ras-
polaganju.
Promjene pridržane!
USA
Please read these operating instructions before using
the equipment for the  rst time.
Safety Notes
Please observe the following safety notes during
the installation and connection.
Disconnect the negative terminal of the battery before
carrying out installation and connection work.
Observe the vehicle manufacturer's safety instructions
(regarding airbags, alarm systems, trip computers,
vehicle immobilisers).
When you drill holes, ensure that you do not damage any
vehicle components.
If the positive and negative cable are extended, ensure
that the cross section is not less than 2.5 mm
2
.
An incorrect installation can result in malfunctions of the
electronic vehicle systems or your car sound system.
Installation and connection instructions
With respect to accident safety, the XLf 200 A must be se-
cured in a professional way.
When selecting the installation location, select a dry loca-
tion that offers sufficient air circulation for cooling the
ampli er.
The XLf 2000 A must not be installed on rear shelves, rear
seats or other locations that are open to the front.
The installation location must be suitable to accept the
accompanying screws and provide a firm support (see
page 37 / Fig. 1).
The ampli er power cable must be  tted with a fuse no more
than 30 cm from the battery to protect the vehicle battery in
case of a short circuit between power ampli er and battery.
The fuse of the ampli er protects only the ampli er, not the
vehicle battery.
Connection (see page 38 / Fig. 2)
1 10 A fuse
2 Preampli er inputs
3 Power-on indicator (Protect/Power)
4 Input sensitivity
5 Upper cut-o frequency
6 Phase position
7 Connector cable
8 Right loudspeaker input
9 Left loudspeaker input
: – Earth
; + Battery
BM_XLf200A_22LG.indd.indd 35BM_XLf200A_22LG.indd.indd 35 12.09.2012 11:51:46 Uhr12.09.2012 11:51:46 Uhr
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt Blue Magic XLf 200 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt Blue Magic XLf 200 A in the language / languages: All languages as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info