698524
6
Zoom out
Zoom in
Previous page
1/213
Next page
6
OPERATION
XBASS
Press and hold the EQ button for 2 seconds
to active the XBASS function. Press it and
hold it again to cancel this function.
EQ (Equalisation)
Press EQ button shortly to select the preset
EQ mode as below:
FLAT-CLASSICS-POP-ROCK-EQ OFF
DISPLAY INFORMATION
Press DISP button (10) to show the time
for 5 seconds. Then it returns to show the
information.
SET THE TIME
(1) Manual setting:
Press and hold DISP button for 2 seconds.
The hour of the time will be flashing. Press
/ button to set the correct hour.
Press DISP button shortly to change to
minute. Also use / button to set the
correct minute. After that press DISP
button to confirm.
(2) Synchronize the time from the
RDS station:
To receive a RDS station which has good
signal(The AF symbol of the LCD does not
flashing). Several minutes later the time will
be synchronized to the correct time by the
station’s signal. (Note: None RDS station
does not have this function.)
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display.
ESP FUNCTION
The unit can be shockproof between ten
seconds and twenty seconds.
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the AUX IN jack (13).
Pressing SRC button to switch to AUX
mode when inserted an audio source to the
unit.
RESET FUNCTION
RESET button (23) must be activated with
either a ballpoint pen or thin metal object.
The RESET button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button (23), the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
RADIO OPERATION
SWITCHING TO RADIO MODE
Press SRC button (4) to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.
SELECTING THE RADIO BAND
At radio mode, press BAND button (3)
to select the desired band.
The reception band will change in
following order:
FM1 FM2 FM3 MW1(AM1) MW2(AM2)
SELECTING STATION
Press button (14) or button (9)
shortly to activate automatic seek
function. It will search up/down a
station automatically. Press for 2
seconds until “MANUAL” appears on
the display, the manual tuning mode is
selected. In this
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt AUGSBURG 170 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt AUGSBURG 170 BT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 15,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info