165618

Blaupunkt amsterdam tcm 127 Manual

11
Zoom out
Zoom in
Previous page
1/30
Next page
- 11 -
GB
Connection
1
In order to take advantage of the full car radio output and to avoid
incorrect electrical connections with ISO plugs in the vehicle, it is
advisable not to use the vehicle-specific positive/negative connection
for this car radio.
2 You can avoid making incorrect connections by using the vehicle-
specific Blaupunkt adapter wiring, but !
3 Due to the limited cross-section of the wiring in the vehicle, it is
necessary to use the connection cable 7 607 884 093 in addition to
the vehicle-specific Blaupunkt adapter wiring for the positive/
negative connection.
Be sure to observe Fig. 4, 5
Advantage: The vehicle’s wiring system is not damaged.
Observation for pre-fitted vehicles, e.g. Audi/VW, Mercedes, Ford,
Honda, Porsche
If the vehicle has already been equipped with a 10 A fuse for radio
connection at the factory, then the vehicle-specific adapter cable is
required for hook-up only.
Advantage: The vehicle’s wiring system is not damaged.
Positive connection
Cut the permanent +12 volts line from the vehicle-specific Blaupunkt
adapter wiring, join it with connection cable 7 607 884 093 and connect
it directly to the positive terminal of the battery.
Negative connection
Do not connect the negative line to the negative terminal of the battery.
Cut the negative line from the vehicle-specific Blaupunkt adapter wiring,
join it with connection cable 7 607 884 093 and lay the negative line to
a suitable ground, such as a chassis screw, the chassis itself or
corresponding grounds (do not roll up the wiring).
Preparing for the installation of the car radio
The car radio is designed to be installed in the car radio compartment
provided by the vehicle manufacturer. Open the car radio compartment
(remove the shelf or panel by unclipping it) or adjust the size of the car
radio compartment to measure 182 x 53 mm.
For vehicles with deviating installation compartments, Blaupunkt offers
installation kits for 50 mm radio units for the most popular vehicle models.
Check the installation situation in the vehicle and, if necessary, use one
of the special installation kits for specific vehicle models,
e.g. Audi A4/A6/A8: 7 608 021 473
Note:
The mounting bracket included with this car radio is designed for
installation in vehicles with a standard DIN installation compartment
measuring 182 x 53 mm, 165 installation depth and an instrument panel
thickness of approximately 1 to 20 mm in the area of the tab fasteners,
see Fig. 1.
Reach behind the car radio compartment and check to see which tab
fasteners can be bent for the mounting bracket.
Note: Try to be sure to bend all of the tabs.
Place the mounting bracket in the compartment and bend over the tabs
with the help of a screwdriver, see Fig. 1, 2.
Connection, see page 4 or 5 or 6
Connection instructions............................................................... Fig. 4
Positive/negative connection with vehicle-specific
adapter cable .............................................................................. Fig. 5
Positive/negative connection with connection line
7 607 884 093 ........................................................................... Fig. 5a
Equalizer or amplifier connection, (CINCH) ................................ Fig. 6
Do not connect the control wire to terminal 15 (+12 V switched) or
terminal 30 (permanent +12 V), maximum load < 150 mA.
Connection of 4 loudspeakers (4/35 W)...................................... Fig. 7
LF = left front, RF = right front, LR = left rear, RR = right rear.
Connection of free speach microphon ........................................ Fig. 8
Connection of hand set ............................................................... Fig. 9
CD player connection CDC-A06 / 072 ...................................... Fig. 10
Connection of IR remote control RCT-07.................................. Fig. 11
Use the connection cable attached to the remote control.
If necessary, also use cables 7 607 647 093 and 7 607 648 000.
CD player connection CDC-A05 / 071 ...................................... Fig. 12
CD player connection CDC-F05 ............................................... Fig. 13
Connection in vehicles with QuickOut or remote control
In vehicles equipped with a QuickOut (currently Opel), the QuickOut unit
must be removed and the adapter cable used.A car radio remote control
(e.g. on steering wheel), amplifier or CD changer installed by the car
manufacturer is not operable in combination with a Blaupunkt car radio.
Installing the car radio
Place the car radio in the front of the mounting bracket and push it in until
the side springs snap into position on the left and the right (you will hear
an audible click).
Removing the car radio
Insert the handles into the holes in the panel on the left and right of the
radio and push them in until you hear a distinct click (unlocks side
springs).
Pull the unit out using both handles, see Fig. 3
Note: Handles which have snapped into place can only be
removed after you have pulled the radio out of the
compartment.
DNC (masking of driving noises)
For a description of the equaliser setting and the DNC calibration
process (masking of driving noises) please refer to the owner's manual.
This information is subject to change without notice!
Car radio connection
ISO plug in the vehicle
Car radio connection
with adapter wiring
Car radio connection
with adapter and connection wiring
8 622 400 963
8 601 910 002
2
2
1
1
Fig. 2
Fig. 3
Fig. 1
Illustrations
53
182
165
8 601 310 742
1-20
2
3
1
5A
+12V/Kl15
+12V
per.+12V
5A
+12V/Kl15
+12V
per.+12V
+12V / Kl15
+12V
per.+12V
15A
12V
5A
per.+12V
7 607 884 093
Fix the guide pin with or without spacer on the stud at
the car radio rear side.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt amsterdam tcm 127 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt amsterdam tcm 127 in the language / languages: All languages as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt amsterdam tcm 127

Blaupunkt amsterdam tcm 127 User Manual - English - 64 pages

Blaupunkt amsterdam tcm 127 User Manual - German - 65 pages

Blaupunkt amsterdam tcm 127 User Manual - Dutch - 59 pages

Blaupunkt amsterdam tcm 127 User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info