614921
8
Zoom out
Zoom in
Previous page
1/30
Next page
8
MIX-ALL on:
Hold 5/MIX depressed.
Press 5/MIX to disactivate MIX.
7 Clock display
Press the DIS key when the unit is
turned on and the current time will be
shown for approximately 8 seconds.
Additional features of the clock display
Press and hold DIS key until it beeps
which will result in a permanent time
display.
When carrying out other functions, the
time display will be masked for approx-
imately 8 seconds.
8 DSC (direct software control)
You can customize certain basic unit
settings with DSC. Additional informa-
tion can be found in the section Pro-
gramming with DSC.
9 AUD
This key activates the tone setting
menu. You can set different tone set-
tings for each operation mode. The last
setting for each operation mode will be
stored. (This applies only to the Ne-
vada RDM 168 and the Alaska RDM
168.)
Setting treble (high tones) and bass
(low tones):
Press the AUD key once. The display
will show BASS and you can change
the setting by pressing the toggle
switch either to the left or right.
You can change the treble setting by
pressing the rocker switches either up
or down while the display shows TRE-
BLE.
The display will show the chosen val-
ues. The last value will be stored.
Press the AUD key to disactivate.
The AUD setting will end automatically
if there is no change within 8 seconds.
Setting balance (left/right) and fader
(front/back):
Press the AUD key two times.
By operating the rocker switches up or
down you can set the volume ratio be-
tween the front and the back speakers.
At the same time the display will indi-
cate FADER.
Press the toggle switches to the left
and right to adjust the volume. At the
same time, the display will indicate
BALANCE.
The display will show the selected val-
ues. The last value will be stored.
Press the AUD key to turn off.
The AUD setting will be end automati-
cally if there is no change within 8 sec-
onds.
9 LD - loudness
To set the low tones appropriate for
the human ear at low volume levels.
Press the AUD key to turn the loud-
ness function on/off and hold the key
down until you hear a beep. In units
with source tone memory, the loud-
ness function can be turned on and off
for each signal source independently.
: Toggle switch
Radio operation
Automatic tuning
/ Station search
up
down
Manual tuning
<< >> incrementally up/down
(in FM only when AF turned off)
1.BA Alas,Flori,Neva168 gb 08.06.2000, 12:03 Uhr8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt Alaska RDM 168 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt Alaska RDM 168 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info