614684
9
Zoom out
Zoom in
Previous page
1/13
Next page
ACR 4251 GB
20
Switching from stereo to mono
(FM)
If reception is poor, you may get better sound
quality by switching to mono:
Press the lo button until a beep sound
is released and the stereo sign
dis-
appears from the display.
Each time the radio is switched on, stereo
playback is activated (
is displayed).
The unit will automatically switch to mono if
the received signal is not strong enough for
stereo playback.
Changing the memory bank
You can shift between the memory banks I, II
and T in order to store stations and recall
them later.
The currently selected memory bank is indi-
cated in the display.
Toggle the FM
T button until the desired
memory bank lights up in the display.
Press the AF button for approximately
2 seconds until you hear the beep and
REG OFF is indicated in the display.
When active, REG ON will be briefly dis-
played each time the radio is switched on.
Selecting a waveband
You can choose between the following wave-
bands:
FM 87.5 - 108 MHz
MW 531 - 1602 kHz and
LW 153 - 279 kHz.
Set the desired waveband by pressing
FM
T or M·L.
To switch from MW to LW or vice versa
Press the M·L button.
Selecting a station
Using the buttons there are two different
ways to tune into a station:
Automatic tuning
Prerequisite: AF and m do not light up in
the display, i.e. the Alternative Frequency
function and manual tuning are switched off.
Use the AF and lo buttons (lo, m, -, lo) to
adjust the respective modes.
Press
; the car radio will automati-
cally search for the next station.
When keeping the
or the button de-
pressed, seek tuning will speed up in up-
wards or downwards direction.
Manual tuning
Prerequisite: m lights up in the display.
Toggle the lo button until m is displayed.
Press ; the frequency will change in
short intervals in upwards or down-
wards direction.
When holding the
or button down, the
frequency scan is speeded up.
Selecting the seek tuning sensi-
tivity
You can alter the automatic seek tuning
sensitivity.
For this,
press the lo button briefly.
If lo is displayed, the radio will only pick up
strong, local stations (low sensitivity).
If lo does not light up, the radio will also pick
up weaker, distant stations (high sensitivity).
Make sure that m is not indicated in the
display.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blaupunkt ACR 4251 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt ACR 4251 in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt ACR 4251

Blaupunkt ACR 4251 User Manual - German - 16 pages

Blaupunkt ACR 4251 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info