Manual Blaupunkt 5B10M0050 (page 6 of 32) (English)

686523

Zoom out

Zoom in

1/32

en Installation and connection

5Installation and connection

Instal l ati on and connect i on

This appliance is only intended to be fully fitted in a

kitchen. Observe the special installation instructions.

Do not install the appliance behind a decorative door or

the door of a kitchen unit, as this may cause the

appliance to overheat.

Electrical connection

Only licensed specialists may connect the appliance.It

is important that you comply with the requirements of

your electricity supplier.

Any damage arising from the appliance being

connected incorrectly will invalidate the warranty.

Caution!

If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

■ The appliance must be disconnected from the power

supply whenever installation work is being carried

out.

■ The appliance fulfils the requirements of protection

class I and may only be connected to an earthed

socket.

■ The mains power cable must be at least type

H05 V V-F 3G, 1.5 mm².

:Warning – Danger of death!

There is a risk of electric shock if you touch live

components.

■ Always make sure your hands are dry when you

touch or hold the mains plug.

■ Only pull out the mains cable by taking hold of the

plug and removing the plug; never pull it out by the

mains cable itself, as this could damage it.

■ Never unplug the mains plug when the appliance is

in operation.

Please note the following information and ensure that:

Notes

■ The mains plug fits the socket.

■ The cable cross section is adequate.

■ The earthing system is properly installed.

■ The mains cable is only replaced by a qualified

electrician (if this is necessary).Spare mains cables

can be ordered from our after-sales service.

■ No power strips/multi-way connectors or extension

cables are used.

■ If using a residual current device, only use one that

bears the mark z.

The presence of this mark is the only way to be sure

that it fulfils all the applicable regulations.

■ The mains plug can be accessed at all times.

■ The mains cable is not kinked, crushed, modified or

severed.

■ The mains cable does not come into contact with

heat sources.

Measures to be noted during transport

Secure all mobile parts in and on the appliance using

an adhesive tape that can be removed without leaving

any traces. Push all accessories (e.g. baking tray) into

the corresponding slots with cardboard at the edges, in

order to avoid damaging the appliance. Place

cardboard or similar between the front and rear side to

prevent knocks against the inside of the glass door.

Secure the door and, if available, the top cover to the

appliance sides using adhesive tape.

Keep the original appliance packaging. Only transport

the appliance in the original packaging. Observe the

transport arrows on the packaging.

If the original packaging is no longer available

pack the appliance in protective packaging to

guarantee sufficient protection against any transport

damage.

Transport the appliance in an upright position. Do not

hold the appliance by the door handle or the

connections on the rear, as these could be damaged.

Do not place any heavy objects on the appliance.

I broke my oven door glass for a series 2 HEN201.2 any idea what part number to use in South Africa to order a new one please Submitted on 14-7-2020 at 18:57
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blaupunkt 5B10M0050 in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Blaupunkt 5B10M0050

Blaupunkt 5B10M0050 User Manual - German - 32 pages

Blaupunkt 5B10M0050 User Manual - Dutch - 32 pages

Blaupunkt 5B10M0050 User Manual - French - 32 pages

Blaupunkt 5B10M0050 Installation Guide - All languages - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blaupunkt 5B10M0050 Manual

Product: