698890
23
Zoom out
Zoom in
Previous page
1/44
Next page
23
USER MANUAL
※ You can set the motion detection function on the BlackSys Viewer : Configuration Settings >> Motion.
Or directly from the BlackSys App : BlackSys Settings >> Motion Detection.
※ White LED will blink while motion recording is active.
※ Motion detection may fail when the vehicle is in extreme lighting conditions.
※ Recording time during parking mode may vary depending on the vehicles’ battery voltage.
※ Motion recording may continue according to changes in the environment, the sensitivity must be set to in accordance with your parking environment.
(E.g. When parking in an alley or underground, frequent movements may interfere with motion recording if set on a high sensitivity.)
6. Time Lapse Recording
- When Time Lapse Recording is enabled in user settings, 30-second videos are recorded and saved in MotionMovie folder. Time Lapse Re-
cording captures at one frame per second when the vehicle is parked.
※ Each file is 30 seconds but the span is 7 minutes 30 seconds.
※ Event/Motion Detection Recording does not operate if Time Lapse Recording is enabled.
7. Driving Information Check
- Configuration setting → GPS function → Driving Information
After you have set the storage intervals for driving information on the configurations settings, the desired data points will then be saved
at every programed interval.
8. ADAS(Advanced driver assistance system) Guide
- LDWS : when vehicle speed keeps over 30km/h, function will be calibrated within 2~4 min. and Green LED is ON.
If camera detect lane departure when speed is over than settings, warning alarm comes and Green LED is Blink. (0.3sec.)
- FCWS : If camera detect collision with front vehicle when speed is over than settings, warning alarm comes and Green LED is Blink. (0.2sec.)
- FVSA : If front vehicle departure while vehicle speed is 0km/h, warning alarm comes and Green LED is Blink. (0.6sec.)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blacksys CH200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blacksys CH200 in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info