389511

Black Decker xta 71 k Manual

6
Zoom out
Zoom in
Previous page
1/56
Next page
6
ENGLISH
Emptying the dust cassette (fig. D)
X The dust cassette should be emptied every 10 minutes.
X Pull the dust cassette (3) to the rear and off the tool .
X Remove the cover (2) by twisting it counterclockwise.
X Hold dust cassette with the filter (8) facing down and shake
the cassette (3) to empty the contents.
X Shake the cover (2) to empty the contents.
X Refit the cover (2) onto the dust cassette (3), twisting it
clockwise until it locks into place.
X Fit the dust cassette (3) onto the tool.
Cleaning the dust cassette filter
Warning! Do not brush or use compressed air or sharp objects
to clean the filter. Do not wash the filter.
X The dust cassette filter (8) is re-usable and should be
cleaned regularly.
X Empty the dust cassette filter (8) as described above.
X Pull the dust cassette filter (8) off the dust cassette (3). DO
NOT TWIST THE FILTER.
X Shake off the excess dust by tapping the filter (8) into a
dustbin.
X Replace the dust cassette filter (8).
X Fit the cover (2).
X Fit the dust cassette (3) onto the tool.
Connecting a vacuum cleaner (fig. F)
X Slide the adaptor (9) over the dust extraction outlet (4).
X Connect the hose of the vacuum cleaner to the adaptor.
Hints for optimum use (fig. E)
X Do not place your hands over the ventilation slots.
X Do not exert too much pressure on the tool.
X Regularly check the condition of the sanding sheet. Replace
when necessary.
X Always sand with the grain of the wood.
X When sanding new layers of paint before applying another
layer, use extra fine grit.
X On very uneven surfaces, or when removing layers of paint,
start with a coarse grit. On other surfaces, start with a
medium grit. In both cases, gradually change to a fine grit
for a smooth finish.
X Consult your retailer for more information on available
accessories.
Maintenance
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Before performing any maintenance, switch off and unplug
the tool.
X Regularly clean the ventilation slots in your tool using a soft
dry brush or dry cloth.
X Regularly clean the motor housing using a clean damp
cloth. Do not use any abrasive or solvent-based cleaner.
If a new mains plug needs to be fitted:
X Safely dispose of the old plug.
X Connect the brown lead to the live terminal in the new plug.
X Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Should you find one day that your tool needs
replacement, or if it is of no further use to you,
think of the protection of the environment. Black
& Decker repair agents will accept old Black &
Decker tools and make sure that they are
disposed of in an environmentally safe way.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this
service please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com
.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker xta 71 k at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker xta 71 k in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info