586593
5
Zoom out
Zoom in
Previous page
1/20
Next page
5
ENGLISH
Features
This appliance includes some or all of the following features.
1. Container
2. Extension tubes
3. Handle adapter
4. Hose
5. On/off switch
6. Handle
7. Blower connector
8. Upholstery tool
9. Crevice tool
10. Wheels
11. Brush/squeegee attachment
12. Floor head
Assembly
Removing the lid (fig. A)
X Release the two clips (14) that hold the lid (13) in place.
X Carefully remove the lid from the appliance.
Fitting the lid (fig. A)
X Fit the lid to the container (1) making sure that the
blower connector (7) is adjacent to the hose inlet (19)
and that the recesses in the lid line up with the clips (14).
X Fasten the two clips (14).
Assembling the wheel support (fig. B)
X Assemble the two parts of the wheel support (15)
together, make sure that they are firmly attached.
X Remove the lid as described above and turn the
container (1) upside down.
X Attach the wheel support (15) to the rim of the base of
the container (1) by applying slight pressure.
X Insert the four wheels (10), make sure that they click
firmly into place.
X Fit the lid as described above.
Fitting the paper dust bag (dry vacuuming only) (fig. C)
X Remove the lid as described above.
X Fit the cardboard flange (17) of the paper dust bag (16)
around the hose inlet (18).
X Fit the lid as described above.
Connecting and disconnecting the hose (fig. D)
To connect the hose:
X Insert the hose connector (20) into the inlet (19) of the
appliance.
X Line up the hose connector tabs with the slots in the
inlet.
X Turn the hose connector (20) clockwise until it locks into
position.
To disconnect the hose:
X Turn the hose connector (20) counter-clockwise and
pull out the hose.
Fitting the handle adaptor (fig. E)
X Push the handle adaptor (3) into the end of the hose (4)
until the flange is flush with the end of the hose.
Mounting the extension tube (fig. E)
X Firmly push one of the extension tubes (2) into the
handle adaptor (3).
X If required, attach the other extension tube (2) to the
end.
Mounting accessories (fig. E and F)
The crevice tool (9) allows for vacuuming in narrow and
hard-to-reach places. The upholstery tool (8) allows for
vacuuming on furniture, blinds, curtains, windows and stairs.
The brush or the squeegee blade are connected to the
brush/squeegee attachment (11) by sliding them into
position in between the guide ribs on the brush/squeegee
attachment (11).
The brush is used for dry vacuuming, the squeegee is used
for wet vacuuming.
The brush/squeegee attachment (11) can be attached to the
floor head (12) when required.
X To fit the brush/squeegee attachment (11), push it into
the floor head (12) until the two tabs (21) click into the
slots in the brush head.
X To remove the brush/squeegee attachment (11), press
the two tabs (21) inwards in the slots in the brush head
and carefully push it downwards until it is removed.
The accessories can be mounted on both the handle
adaptor (3) and the extension tubes (2).
X Firmly push the accessory onto the handle adaptor (3)
or extension tube (2) as required.
X To remove an accessory, pull the accessory from the
handle adaptor or the extension tube.
Use
Switching on and off (fig. G)
X To switch the appliance on, press the on/off switch (5)
to the I position.
X To switch the appliance off, press the on/off switch (5)
to the 0 position.
Vacuuming
X When operating the appliance, make sure that the hose
is not trapped, twisted or blocked.
X In case of overheating, a cut-out will operate and the
appliance will automatically stop.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker WBV1400 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker WBV1400 T1 in the language / languages: English, Italian as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info