581267

Black Decker VPX1301 T1 Manual

7
Zoom out
Zoom in
Previous page
1/88
Next page
7
ENGLISH
vibration, as well as prevent the blade from being
damaged.
X Cut only with sharp blades; they cut cleaner, faster and
put less strain on the motor while cutting.
X For longer blade life, use bi-metal blades. They are
more flexible and less prone to breaking.
Hints for optimum use
Sawing wood
Warning! Use extra caution when cutting overhead and pay
particular attention to overhead wires which may be hidden
from view. Anticipate the path of falling branches and debris
ahead of time.
Warning! Inspect the work site for hidden gas pipes, water
pipes, or electrical wires before making blind or plunge cuts.
Failure to do so may result in explosion, property damage,
electric shock, and/or serious personal injury.
X Clamp the workpiece securely and remove all nails and
metal objects. Holding the work by hand or against your
body leaves it unstable and may lead to loss of control.
X Place the shoe firmly against the work to be cut.
X Let the blade run freely for a few seconds before starting
the cut.
X Whenever possible, work with the shoe (4) pressed
against the workpiece. This will improve tool control and
reduce tool vibration, as well as prevent the blade from
being damaged.
Sawing metal
Be aware that sawing metal takes much more time than
sawing wood.
X Use a saw blade suitable for sawing metal. Use a fine-
tooth saw blade for ferrous metals and a coarser saw
blade for non-ferrous metals.
X When cutting thin sheet metal, clamp a piece of scrap
wood to the back surface of the workpiece and cut
through this sandwich.
X Spread a film of oil along the intended line of cut.
X When cutting metal piping, do not cut directly through
the pipe as you would saw a wooden dowel. Instead, cut
around the circumference of the pipe to avoid pinching
the blade. Only one section of the blade should be in
contact with the pipe.
Pocket cutting - wood only
Pocket cutting is used to cut a hole in a piece of material
without cutting from the side.
X Measure and mark the required pocket cut.
X Fit a saw blade suitable for pocket cutting.
X Rest the shoe (4) on the workpiece in such a position
that the blade forms an appropriate angle for the pocket
cut.
X Switch on the tool and slowly feed the blade into the
workpiece. Make sure that the shoe (4) remains in
contact with the workpiece at all times.
Pruning
Warning! Do not use the tool while in a tree, on a ladder or
on any other unstable surface. Be aware of where the
branch will fall.
X Cut downward and away from your body.
X Make the cut close to the main branch or tree body.
Maintenance
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
X Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
X Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Never let any liquid get inside the tool and never
immerse any part of the tool into liquid.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker VPX1301 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker VPX1301 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker VPX1301 T1

Black Decker VPX1301 T1 Quick start guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info