Manual Black Decker VP900 T1 (page 7 of 12) (English)

578624

Zoom out

Zoom in

1/12

much paint will reach the roller. If this happens,

release the trigger and use the paint on the roller

until more is required.

• Immediately paint reaches the roller, start rolling on

the wall/ceiling. It will take a few moments for the

roller to become fully saturated with paint, after

which you will be able to paint quickly and evenly.

• With the roller fitted, choose an area of about 1m

and apply the paint with long steady strokes at a

speed that gives a good covering of paint. At this

stage the appearance will be somewhat uneven.

Now release the trigger so no more paint is flowing,

and blend to an even finish using long vertical

strokes. For a one coat finish it is important not to try

to spread the paint too far.

For convenience,

the channel in your

Paintmate handle (17)

can be used as a rest for

the handset. The roller

can be stopped from

drying out for up to

24 hours by sealing

within a polythene bag. Never leave the unit more than

one hour without either cleaning or sealing.

CLEANING AFTER USE

Never use solvents to clean any part of your

Paintmate. Only use water and mild soap if necessary.

When you have finished painting, switch the unit off by

depressing the orange button on your Paintmate.

Now release the latch,

lower the handle, raise

the lid and remove the

paint bag.

Remove the tube from

the Handypack by

carefully twisting the

connector anti-

clockwise. Keep the

roller and tube

assembly together for

the first part of the

cleaning process. Never

attempt to clean the

brush until the main

tube is clean.

The tube and roller may

now be flushed with

water by attaching to

the tap connector (15)

provided with your

Paintmate.

Use the wire clip (14) to

lock-on the the handset

trigger during the

cleaning operation.

Attach the tap

connector very securely

to a mains cold water

tap and slowly turn on

the tap.

To flush the paint from

the roller, gently roll it

forwards and

backwards in the bottom

of the sink.

Ensure the tube is

completely clean before

storing. The handset

should be wiped to remove any paint spills.

The roller assembly may

now be dismantled into

its three component

parts; the roller (12),

paint flow guide (11) and

holder (10).

The roller can be fully

cleaned by rotating it

under running water.

The paint flow guide and

holder can be cleaned in

warm water to remove

any paint residue.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker VP900 T1 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker VP900 T1 Manual

Product: