73270
6
Zoom out
Zoom in
Previous page
1/68
Next page
6
ENGLISH
Features
1. On/off switch
2. Container door
3. Release button for container door
4. Power cord retainer
Fig. A
5. Hard brush
6. Crevice tool
7. Rigid adaptor
8. Floor head
9. Hose
10. Blow adaptor
11. Tubes
12. Tool adaptor
13. Blow diffuser
14. Small inflator adaptor
15. Medium inflator adaptor
16. Large inflator adaptor
Assembly
Warning! Make sure that the appliance
is switched off and unplugged.
Fitting the accessories for
vacuuming (fig. B & C)
The accessories provided can be used in
various combinations, depending on the
task (fig. B):
a. General vacuuming / dusting
b. Vacuuming in confined spaces
c. Vacuuming stairs
d. Vacuuming upholstery
e. Vacuuming in corners
f. Vacuuming carpeted floors
g. Vacuuming hard floors
The hard brush (5) and the crevice tool (6)
are stored in the appliance. To fit an
accessory, proceed as follows (fig. C):
Take the accessories from the
appliance.
Insert the appropiate accessory into
the front of the appliance.
Fitting the accessories for blowing
and inflating (fig. D - G)
The accessories provided can be used in
various combinations, depending on the
task (fig. D):
a. Blowing
b. Inflating
To fit an accessory, proceed as follows
(fig. E & F):
Open the exhaust filter cover (17).
Insert the blow adaptor (10) into the
opening (18). Make sure the adaptor
fits snug against the rear of the
appliance.
Fit the hose (9) to the adaptor.
Insert the appropiate accessory into
the hose.
To fit an inflator adaptor to the hose,
proceed as follows (fig. G):
Align the tab (19) on the adaptor
with the hole (20) in the hose end.
Push the adaptor on the hose until it
clicks into place.
To remove the adaptor, lift up the
tab and pull the adaptor off the hose.
Use
Warning! Before connecting to the
power supply, make sure that the
appliance is switched off.
Warning! Never use the appliance
without the filters. Optimum dust
collection will only be achieved with
clean filters and an empty container.
Switching on and off (fig. A)
To switch the tool on, press the
on/off switch (1).
To switch the tool off, press the
on/off switch again.
Warning! Make sure the accessories
are securely attached before switching
on. Keep a firm grip on the appliance,
and especially the hose, when switching
on and during use.
Using the inflator adaptors (fig. H)
Choose the appropiate adaptor for
the item to be inflated.
During inflation, the airflow can be
adjusted by covering the hole (21)
with your thumb.
Do not over-inflate or exceed the
recommended pressure of the item
to be inflated.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker VH 900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker VH 900 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info