531189
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
Features
This appliance includes some or all of the following features
(fig. A).
1. On/off switch
2. Speed control switch
(VB1630/VB1740/VB1820/VB1850/VB2050)
3. Cord rewind button
4. Handle
5. Cover
6. Hose
7. Airflow control switch
8. Extension tube
9. Suction head
10. Wheels
In addition, this appliance is supplied with some or all of the
following accessories (fig. B):
11. Crevice tool
12. Brush tool
13. Parquet floor head (VB1630/VB1740/VB1850)
14. Turbo brush (VB2050)
The parquet floor head is not included with all models.
This accessory is available from your Black & Decker dealer /
service centre (cat. no. VW70).
The turbo brush is not included with all models. This accessory
is available from your Black & Decker dealer / service centre
(VW80).
Assembly
Fitting the dustbag (fig. C & D)
Warning! Before first use, make sure to fit a dustbag.
Open the cover (5) as shown (fig. C).
Place a dustbag (15) in the dustbag holder (16).
Align the dustbag collar (17) with the inlet (18) (fig. D).
Make sure that the inlet protrudes into the dustbag collar.
Close the cover.
Connecting the hose (fig. E)
Insert the hose connector (18) into the inlet (19) of the
appliance.
Slide the hose further until the release buttons (20) click
into place.
To disconnect the hose, press the release buttons and pull
out the hose.
Mounting the extension tube (fig. F)
Press the lock button (21) and slide the hose nozzle (22)
into the tube (8) until it clicks into place.
To remove the tube, press the lock button and pull the
hose out of the tube.
Mounting the suction head (fig. G)
The suction head (9) allows for vacuuming on carpet and hard
surfaces (e.g. laminate and tiles).
Press the lock button (23) and slide the tube (8) into the
head (9) until it clicks into place.
To remove the head, press the lock button and pull the
tube out of the head.
VB1630/VB1740/VB1850 - Mounting the parquet
floor head (fig. G)
The parquet floor head (13) allows for vacuuming on wooden
and polished surfaces.
Press the lock button (23) and slide the tube (8) into the
head (9) until it clicks into place.
To remove the head, press the lock button and pull the
tube out of the head.
VB2050 - Mounting the turbo brush (fig. G)
The turbo brush (14) allows for vacuuming on cut pile
carpeting. The brush is particularly useful for picking up hair,
threads, etc., as well as for refreshing trotted-down carpet pile.
Press the lock button (23) and slide the tube (8) into the
head (9) until it clicks into place.
To remove the head, press the lock button and pull the
tube out of the head.
Mounting accessories (fig. G & H)
The crevice tool (11) allows for vacuuming in narrow and hard-
to-reach places. The brush tool (12) allows for vacuuming on
furniture, blinds, curtains, windows and stairs. The accessories
can be mounted on both the hose (6) and the tube (8).
When not in use, the accessories can be stored in the
accessory holder (24).
Remove the accessory from the holder (fig. H).
Press the lock button (21 or 23) and slide the accessory
onto the hose nozzle (22) or the tube (8) (fig. G).
To remove an accessory, press the lock button (21 or 23)
and pull the accessory off.
Use
Unwinding and rewinding the cord (fig. A)
The cord rewind button (3) can be operated by hand or foot.
Before use, pull a sufficient length of cord from the back
of the appliance.
After use, press the cord rewind button to store the cord
back into place. Manually guide the cord to ensure it does
not swing back. Ensure the plug is correctly located.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker VB2050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker VB2050 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info