320983

Black Decker vb 2000 Manual

7
Zoom out
Zoom in
Previous page
1/96
Next page
7
ENGLISH
Mounting accessories (fig. D)
The crevice tool (12) allows for
vacuuming in narrow and hard-to-reach
places. The brush tool (12) allows for
vacuuming on furniture, blinds, curtains,
windows and stairs. The upholstery brush
(13) allows for vacuuming furniture.
The accessories can be mounted on both
the hose (5) and the tube (7).
Push the accessory onto the hose
nozzle (18) or the tube (7).
To remove an accessory, pull the
accessory from the hose nozzle or
the tube.
Selecting the crevice tool or
brush tool (fig. E)
To use the crevice tool, move the
brush part (19) against the direction
of the arrow.
To use the brush tool, move the
brush part (19) in the direction of the
arrow.
Use
Unwinding and rewinding the
power cord
The cord rewind button (2) can be
operated by hand or foot.
Pull a sufficient length of cord from
the back of the appliance.
After use, press the cord rewind
button to retract the cord into the unit.
Manually guide the cord to ensure it
does not swing back. Ensure the plug
is correctly located.
Adjusting the tube length (fig. F)
The extension tube (7) can be adjusted
as follows:
Push the knob (20) and slide the tube
to the desired length.
Release the knob.
Adjusting the suction head (fig. D)
For vacuuming on carpets, switch the
brush actuator (21) into the up
position.
For vacuuming on laminates, tiles,
etc., switch the brush actuator into
the down position.
Switching on and off
The on/off switch (1) can be operated by
hand or foot.
To switch the appliance on, press the
on/off switch (1).
To switch the appliance off, press the
on/off switch again.
Setting the suction force
The speed control selector (3) allows for
a precise setting of the suction force.
For vacuuming on a hard surface
(e.g. floors), choose a high speed setting.
For vacuuming on soft surfaces
(e.g. upholstery), choose a low speed
setting.
Slide the speed control selector to
the desired setting.
Adjusting the airflow (fig. G)
Move the airflow control switch (6) to
adjust the airflow as desired.
Vacuuming
When operating the appliance, make
sure that the hose is not trapped,
twisted or blocked.
In case of overheating, a cut-out will
operate and the appliance will
automatically stop.
If the appliance stops operating,
unplug the appliance and allow it to
cool for 2-3 hours before continuing.
Ensure the filters are cleaned and the
unit is blockage free before switching
back on.
Hints for optimum use
When vacuuming stairs, always start
at the bottom and work your way up.
Position the appliance on the floor
and do the stairs until halfway. Then
carry the appliance to a stable
position which is at least one stair
below your working position, and do
the top half of the stairs.
Carrying the appliance
During use the appliance can be carried
using the handle (4).
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker vb 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker vb 2000 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info