Manual Black Decker vb 1630 (page 9 of 68) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

315880

Zoom out

Zoom in

1/68

ENGLISH

12. Brush tool

13. Parquet floor head (VB1630/VB1740/VB1850)

The parquet floor head is not included with all models.

This accessory is available from your Black & Decker

dealer / service centre (cat. no. VW70).

Assembly

Fitting the dustbag (fig. C & D)

Warning! Before first use, make sure to fit a dustbag.

◆ Open the cover (5) as shown (fig. C).

◆ Place a dustbag (15) in the dustbag holder (16).

◆ Align the dustbag collar (17) with the inlet (18) (fig. D).

◆ Make sure that the inlet protrudes into the dustbag collar.

◆ Close the cover.

Connecting the hose (fig. E)

◆ Insert the hose connector (18) into the inlet (19) of the

appliance.

◆ Slide the hose further until the release buttons (20) click

into place.

◆ To disconnect the hose, press the release buttons and pull

out the hose.

Mounting the extension tube (fig. F)

◆ Press the lock button (21) and slide the hose nozzle (22)

into the tube (8) until it clicks into place.

◆ To remove the tube, press the lock button and pull the

hose out of the tube.

Mounting the suction head (fig. G)

The suction head (9) allows for vacuuming on carpet and hard

surfaces (e.g. laminate and tiles).

◆ Press the lock button (23) and slide the tube (8) into the

head (9) until it clicks into place.

◆ To remove the head, press the lock button and pull the

tube out of the head.

VB1630/VB1740/VB1850 - Mounting the parquet floor

head (fig. G)

The parquet floor head (13) allows for vacuuming on wooden

and polished surfaces.

◆ Press the lock button (23) and slide the tube (8) into the

head until it clicks into place.

◆ To remove the head, press the lock button and pull the

tube out of the head.

Mounting accessories (fig. G & H)

The crevice tool (11) allows for vacuuming in narrow and

hard-to-reach places. The brush tool (12) allows for vacuuming

on furniture, blinds, curtains, windows and stairs.

The accessories can be mounted on both the hose (6) and the

tube (8). When not in use, the accessories can be stored in the

accessory holder (24).

◆ Remove the accessory from the holder (fig. H).

◆ Press the lock button (21 or 23) and slide the accessory

onto the hose nozzle (22) or the tube (8) (fig. G).

◆ To remove an accessory, press the lock button (21 or 23)

and pull the accessory off.

Use

Unwinding and rewinding the cord (fig. A)

The cord rewind button (3) can be operated by hand or foot.

◆ Before use, pull a sufficient length of cord from the back

of the appliance.

◆ After use, press the cord rewind button to store the cord

back into place. Manually guide the cord to ensure it does

not swing back. Ensure the plug is correctly located.

Adjusting the length of the tube (fig. I)

The extension tube (8) can be adjusted in 21 steps.

◆ Engage the adjustment knob (25) and slide the tube to the

desired length.

◆ Release the knob.

Adjusting the suction head (fig. G)

◆ For vacuuming on carpets, switch the floor surface

selector (26) into the up position.

◆ For vacuuming on laminates, tiles, etc., switch the floor

surface selector into the down position.

Switching on and off (fig. A)

The on/off switch (1) can be operated by hand or foot.

◆ To switch the appliance on, press the on/off switch (1).

◆ To switch the appliance off, press the on/off switch again.

VB1630/VB1740/VB1820/VB1850 - Setting the suction force

(fig. A)

The speed control switch (2) allows for a precise setting of the

suction force.

◆ Slide the speed control switch (2) to the desired setting.

◆ For vacuuming on hard surfaces (e.g. floors), choose a

high speed setting.

◆ For vacuuming on soft surfaces (e.g. upholstery), choose a

low speed setting.

Adjusting the airflow (fig. A)

◆ Move the airflow control switch (7) to adjust the airflow

as desired.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker vb 1630 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker vb 1630 Manual

Product: