586424
7
Zoom out
Zoom in
Previous page
1/68
Next page
7
ENGLISH
Warning! Never fill above the “max” line on the liquid reservoir.
Dispensing liquid (fig. G)
Press the dispense button (2). The liquid will continue to
dispense as long as the dispense button is kept depressed.
Warning! Do not dispense the liquid towards equipment
containing electrical components, such as the interior of ovens.
Switching on and off (fig. G)
To switch the appliance on at low speed, set the on/off
switch to position 1.
To switch the appliance on at high speed, set the on/off
switch to position 2.
To switch the appliance off, set the on/off switch to
position 0.
Hints for optimum use
The appliance can be used with a variety of cleaning agents,
including bathroom, automotive, patio furniture, carpet and
other common household cleaners. Always read and follow
the manufacturer’s instructions on the cleaning agent you use.
Do not use the appliance with abrasive cleaning agents.
Warning! Wear gloves and eye protection when using
aggressive chemical cleaners.
Before cleaning carpets, thoroughly vacuum the surface.
For soiled carpets, dip the shampoo brush in a cleaning
solution and shampoo the soiled area. Move the
appliance in a circular pattern. Do not hold the appliance
in one place while running. Once the foam has
disappeared, let it dry, then vacuum the carpet.
If you are unsure about using this appliance on a particular
surface, test it first on a small inconspicious patch.
Cleaning and maintenance
Regularly clean the motor unit using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
After every use, clean the accessories in soapy water.
Clean the liquid dispensing system after every use and
before storage.
Cleaning the liquid reservoir (fig. F)
Remove the liquid reservoir cap (21).
Empty the liquid reservoir (5) as necessary.
Wipe the inside of the liquid reservoir with a soft damp
cloth and flush with water.
Cleaning the nozzle (fig. H)
Loosen the nozzle (3) and remove it using the cleaning
tool (18).
Immerse the nozzle for a half hour in clear warm water.
Clean the grooves in the nozzle using a fine synthetic brush.
Re-fit the nozzle. Be careful not to overtighten.
Fill the reservoir (5) with clear water.
Dispense the liquid until the reservoir is empty.
Repeat this procedure 1 or 2 times with clear water.
Cleaning the dispensing system (fig. H)
Loosen the nozzle (3) and remove it using the cleaning
tool (18).
Fill the reservoir (5) with warm water.
Dispense the liquid until the reservoir is empty.
Repeat this procedure 1 or 2 times with warm water.
Re-fit the nozzle. Be careful not to overtighten.
Unclogging the dispensing system (fig. H & I)
Fill the reservoir (5) with clear warm water up to the
“max” line.
Loosen the nozzle (3) and remove it using the cleaning
tool (18).
Press the dispense button (2) while inserting the front end
of the cleaning tool (18) into the dispense tube (22)
repeatedly until the dispensing system is unclogged.
The dispensing system is unclogged when the sound of
pressure release is heard, followed by water exiting the nozzle.
Remove the cleaning tool. Dispense the liquid until the
reservoir is empty.
Repeat this procedure 1 or 2 times as necessary to restore
the full flow.
Re-fit the nozzle. Be careful not to overtighten.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker S600 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker S600 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info