25090
8
Zoom out
Zoom in
Previous page
1/16
Next page
8
Using an extension cable
Always use an approved extension cable suitable
for the power input of this tool (see technical
data). Before use, inspect the extension cable for
signs of damage, wear and ageing. Replace the
extension cable if damaged or defective.
When using a cable reel, always unwind the cable
completely. Use of an extension cable not suitable
for the power input of the tool or which is
damaged or defective may result in a risk of fire
and electric shock.
CARTON CONTENTS
The carton contains:
1 Rotary tool
1 Wrench
1 Accessories and application guide
1 Instruction manual
Carefully unpack all parts.
Please note that additional items may be
found in the carton, depending on the letter
suffix following the catalogue number of your
tool.
OVERVIEW (fig. A)
1. On/off switch
2. Spindle lock
3. Speed control knob
4. Collet
5. Collet nut
6. Spindle
7. Suspension hook
ASSEMBLY
Before assembly, make sure that the tool
is switched off and unplugged.
Fitting and removing accessories (fig. B)
Make sure that the tool is switched off and
unplugged.
Activate the spindle lock (2) by setting it to
position B as shown.
Slacken the collet nut (5) by turning
counterclockwise.
Insert the shaft of the accessory into the collet
as far as it will go.
Securely tighten the collet nut.
Release the spindle lock (2) by setting it to
position A as shown.
Make sure that the collet size matches
the shaft diameter.
Never tighten the collet nut without an
accessory in the collet.
Tighten and loosen the collet by hand if
possible. If necessary, use the supplied
wrench to loosen the collet. Do not use
any tools that could mark the finish or
break the collet.
Replacing collets (fig. C)
This tool is supplied with a 3.2 mm collet.
Different sizes are available as an accessory to
accomodate a wide range of accessories. To fit the
correct collet for the accessory to be used:
Make sure that the tool is switched off and
unplugged.
Activate the spindle lock (2) by setting it to
position B as shown.
Remove the collet nut (5) by turning
counterclockwise.
Pull the collet off the spindle (6).
Place the new collet into the spindle.
Loosely screw the collet nut onto the spindle.
Release the spindle lock (2) by setting it to
position A as shown.
USE
Let the tool work at its own pace.
Do not overload.
If you are not sure about the correct
speed setting, start with a low speed
setting and gradually increase it until
you find the optimum setting.
Where indicated, never exceed the
speed rating of an accessory. The wire
brush accessory must not be used
above speed setting 3 (15,000 min
-1
).
Variable speed control (fig. D)
The variable speed control allows you to adapt the
speed of the tool to the application.
ENGLISH
RT650_UK.PM5 13-11-2000, 11:038
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker RT650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker RT650 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker RT650

Black Decker RT650 User Manual - Dutch - 68 pages

Black Decker RT650 User Manual - French, Italian, Portuguese, Spanish, Norwegian - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info