581266

Black Decker RSP1050 T1 Manual

6
Zoom out
Zoom in
Previous page
1/88
Next page
6
ENGLISH
(Original instructions)
Vibration
The declared vibration emission values stated in the technical
data and the declaration of conformity have been measured
in accordance with a standard test method provided by
EN 60745 and may be used for comparing one tool with
another. The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Warning! The vibration emission value during actual use of
the power tool can differ from the declared value depending
on the ways in which the tool is used. The vibration level may
increase above the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons regularly
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
way the tool is used, including taking account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time.
Labels on tool
The following pictograms are shown on the tool:
:
Warning! To reduce the risk of injury, the user must
read the instruction manual.
Electrical safety
#
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
u If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
Using an extension cable
Always use an approved extension cable suitable for the
power input of this appliance (see technical data). The
extension cable must be suitable for outdoor use and marked
accordingly. Up to 30 m of 1.5 mm2 HO5VV-F extension cable
can be used without loss of product performance. Before use,
inspect the extension cable for signs of damage, wear and
ageing. Replace the extension cable if damaged or defective.
When using a cable reel, always unwind the cable completely.
Features
This tool includes some or all of the following features.
1. Adjustable shoe
2. Blade clamp collar
3. Auxiliary handle
4. Pendulum selector switch
5. Variable speed on/off switch
6. Shoe release button
Assembly
Warning! Before attempting any of the following operations,
make sure that the tool is switched off and unplugged and that
the saw blade has stopped. Used saw blades may be hot.
Fitting the saw blade (g. D)
u Hold the tool away from the body
u Rotate the blade clamp collar (2) in the direction shown in
gure D
u Insert the shank of the blade fully into the blade clamp
collar (2).
u Release the blade clamp collar (2) to lock the blade into
position
Note: The blade can be installed with the teeth up to assist in
ush cutting
Removing the saw blade (g. D)
Warning! Burn hazard: Do not touch the blade immediately
after use. Contact with the blade may result in personal injury.
u Rotate the blade clamp collar (2) to the release position
u Remove blade (8)
Auxiliary handle
The auxiliary handle offers a greater choice of gripping posi-
tions. Eight clamping locations are available for the placement
of the auxiliary handle.
Attaching the auxiliary handle (g. B)
u Wrap the handle (3) and strap around the forward gripping
area of the saw.
u Make sure that the handle (3) and strap indexing features
(7) are fully engaged in the matching saw positions.
u Hook the clamp and strap together and press the clamp
lever to the handle (3) to securely latch the handle.
u Check to make sure that the handle (3) is secure before
cutting.
Removing the auxiliary handle.
u Lift the clamp lever and unhook the clamp from the strap.
u Separate and remove the handle (3) and strap from the
saw.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker RSP1050 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker RSP1050 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker RSP1050 T1

Black Decker RSP1050 T1 Quick start guide - English - 12 pages

Black Decker RSP1050 T1 User Manual - Polish - 12 pages

Black Decker RSP1050 T1 User Manual - Turkish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info