Manual Black Decker pv 1405 n (page 8 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

321347

Zoom out

Zoom in

1/76

ENGLISH

If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Warning! Never attempt to replace the charger unit with

a regular mains plug.

Safety of others

X This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning the use of the appliance by

a person responsible for their safety.

X Children should be supervised to ensure that they

do not play with the appliance.

Symbols on the charging base

Features

1. Release latch for container door

2. Container door

3. Collector lock button

4. Two-speed on/off switch

5. Filter cleaning wheel

6. Charging indicator

7. Charging base

8. Dust collector extension

9. Dust collector

Fig. D

10. Crevice tool (optional, see packaging)

11. Brush tool (stored in underside of appliance)

Installation

Fitting the charging base to the wall (fig. A)

The charging base can be placed on a work top or fitted to

the wall to provide a convenient storage and charging point

for the appliance.

When fixing to a wall, make sure that the fixing method is

suitable for the wall type and is appropriate to the weight

of the appliance.

Assembly

Adjusting the dust collector (fig. B & C)

X The dust collector (9) is stored under the appliance. To

adjust for use, lift the appliance from the charging base.

X Press the collector lock button (3) and rotate the dust

collector to the required position.

X Release the collector lock button to lock the dust

collector in position.

X The dust collector can be extended by pulling the dust

collector extension (8) until it locks into position.

X The extension can be retracted by pressing the

button (13) and pushing the extension back into the

dust collector.

X The dust collector should be returned to the storage

position under the appliance after use and while

charging the appliance.

Fitting the accessories (fig. D)

These models are supplied with some or all of the following

accessories:

X A crevice tool (10) for confined spaces.

X A brush tool (11) for furniture and stairs.

To fit an accessory, proceed as follows:

X Take the accessories from the appliance.

X Insert the appropriate accessory into the front of the

appliance.

Use

X Before first use, the battery must be charged for at least

16 hours.

X Place the appliance on the charging base whenever it is

not in use.

Charging the battery (fig. E)

X Make sure that the appliance is switched off. The

battery will not be charged with the on/off switch in the

on position.

X Place the appliance on the charging base (7) as shown.

X Plug in the charger. Switch on at the mains.

The charging indicator (6) will be lit.

X Leave the appliance to charge for at least 16 hours.

Your charging base is double insulated; therefore

no earth wire is required.

Fail-safe isolating transformer. The mains supply is

electrically separated from the transformer output.

The charger automatically shuts off if the ambient

temperature becomes too high. As a consequence

the charger will be inoperable. The charging base

must be disconnected from the mains supply and

taken to an authorised service centre for repair.

The charging base is intended for indoor use only.

Surfaces may become hot during use and during

the cool down period.

130

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker pv 1405 n in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker pv 1405 n Manual

Product: