Manual Black Decker PH5551 (page 8 of 80) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

665812

Zoom out

Zoom in

1/80

ENGLISH

(Original instructions)

1. Hedge trimmer blade

2. Air vents

3. Lock-off angle adjustment button

4. Hedge trimmer head support

5. Locking sleeve (upper)

6. Pole extensionr

7. Locking sleeve (lower)

8. Harness

8a. Securing clip

9. Pole grip

10. Lock-off Button

11. On/Off switch

12. Main handle

13. Power cable

14. Cable strain reliever

15. Rear safe guard

16. Scabbard

Assembly

Warning!Before assembly, make sure that the

appliance is switched off and unplugged.

Warning!Always wear protective gloves when

working with pole pruner.

Warning!This product must be fully assembled

before operation. Do not use this product partially

assembled or assembled with damaged parts.

u The pole pruner shoould be full y assembled within the

package upon delivery.

u Remove the blade cover (17) from the blade (1) before

operating.

Switching on (Fig. A)

u Ensure that the pole pruner blade (1) does not touch any

object.

u Press the lock off button (10) and hold it in position.

u Press the on/off switch (11) to switch the product on.

Switching off

u Release the on/off switch (11).

Warning! Never attempt to lock a switch in the on position.

Extending the pole pruner (Fig. B)

u Loosen the lower locking sleeve (7).

u Push the pole (9) and the pole extension (6) towards each

other to retract, or away from each other to extend.

u Tighten the locking sleeve (7) once the desired length is

achieved.

Warning! Periodically check the connections to ensure that

they are tightened securely.

Warning! The length of the extension pole is limited. Stop

pushing / pulling as soon as you feel resistance. Only extend

to the length required to reach the hedges being trimmed.

Do not attempt to use the product at a lenght which does not

allow you to achieve proper footing and balance at all times.

Angle adjustment (Fig. C)

u Depress the lock-off button (3) of the trimmer head whilst

adjusting it.

u Ensure the lock-off button (3) snaps securely into place.

Warning! The head can be adjusted in ve different positions.

Always ensure the head is securely locked. Do not

attempt to use the product with the head in any other position

or unlocked.

Use

Warning! Let the tool work at its own pace. Do not overload.

Trimming (g. D, E, F, G)

u Adjust the pole to the required length.

u Cut and remove branches exceeding the cutting capacity

of this product using a hand pruner before operation.

Note: Jamming the blade on large branches can cause

damage.

u Always hold the product rmly with both hands on the

gripping surface and handle. Never operate this

product using only one hand.

Note: Try to keep the blades angled at approximately 15° to

the cutting surface (Fig D).

u Cut both sides from the bottom cutting upwards, this will

prevent any of the cuttings falling into the path of the area

still to be cut.

u After cutting the sides proceed to the top.

u When cutting wide hedges with the cutting area in sight

move the cutting blade lightly through the cutting surface

in a sweeping motion following the shape of the hedge or

shrub. A slight tilt downwards of the cutting blade in the

direction of motion is recommended for optimum cutting

performance.

u Move the trimmer with slow motion forward when cutting

an area out of sight.

u Do not rush and do not attempt to cut too much with one

stroke of the cutting blade.

u Cut in a number of stages if the area being cut is particu-

larly long to achieve a better result.

u In order to obtain a very straight cut, stretch a piece of

string along the length of the hedge at the desired height.

Use the string as a guideline, cutting just above it (Fig. E).

u In order to obtain at sides, cut upwards with the growth.

Younger stems move outwards when the blade cuts

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker PH5551 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker PH5551 Manual

Product: