Manual Black Decker NVC115W (page 4 of 35) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

701084

Zoom out

Zoom in

1/35

ENGLISH

(Original instructions)

ENGLISH

(Original instructions)

This tool is double insulated;

therefore no earth wire is

required. Always check that the

power supply corresponds to

the voltage on the rating plate.

The charging base is intended

for indoor use only.

Labels on appliance

The following symbols appear on this appliance along with the

date code:

NVC115JL/NVC115W/NVC115WA/

WDC115WA Only use with charger

SSC-040015EU/ S003BDV0500015

NVC215W/NVC215WA/NVC220WC/

WDC215WA Only use with charger

SSC-080015EU/ S003BEV0800015

Features

This tool includes some or all of the following features.

1. On/off switch

2. Bowl release button

3. Dust bowl

4. Charger base (NVC115W, NVC115WA, NVC215W,

NVC215WA, NVC220WC, WDC115WA, WDC215WA

units only).

4a. Charger jack plug (NVC115JL unit only).

5. Retractable crevice tool (NVC215W, NVC215WA and

NVC220WC Only)

6. Brush tool (NVC115WA, NVC215WA, NVC220WC,

WDC115WA and WDC215WA Only)

7. Crevice tool (NVC115WA Only)

8. Squeegee (WDC115WA and WDC215WA units Only)

Fig. A

10. Dry pick up cloth lter (NVC units Only)

11. Pre-lter (NVC units Only)

12. Wet/Dry foam insert (WDC units Only)

13. Wet/Dry deector (WDC units Only)

Installation

Wall Mounting (NVC115W, NVC115WA, NVC215W,

NVC215WA, NVC220WC, WDC115WA, WDC215WA units

only). (g. B)

The product can be attached to a wall to provide a convenient

storage and charging point for the appliance.

When xing to a wall, make sure that the xing method is

suitable for the wall type and is appropriate to the weight of

the appliance.

u Mark the location of the screw holes (within reach of an

electrical outlet for charging the vac while it is on the wall

bracket).

u Fix the mounting bracket to the wall using appropriate

screws and plugs for the type of wall and weight of the

appliance.

u Hang the appliance on the wall by placing the opening on

the base of the vac over the hook in the wall mount charg-

ing bracket.

Assembly

Accessories (g. C)

These models may be supplied with some of the following

accessories:

u A squeege tool (9) for wet use on hard surfaces.

u A brush tool (6 for furniture and stairs.

u A crevice tool (8) for conned spaces.

u A pet brush tool (7) for pet hair removal.

Note: Never use the pet brush tool directly on a pet.

Fitting (Fig. C)

u Insert the appropriate accessory into the front of the appli-

ance. Make sure that the accessory is pushed fully in.

Retractable crevice tool (NVC215W, NVC215WA and

NVC220WC units only) (Fig. D)

u Extend the crevice tool (5) as shown in gure D, until it

clicks in place.

u To retract the crevice tool, push down on the button (5a)

and slide back into the dust bowl (3) as shown in gure D.

Use

u Before rst use, the battery must be charged for at least

24 hours.

Warning! Before charging, be sure to empty all liquid contents

and dry thoroughly, to avoid damage to your appliance.

Charging the battery via charger base (NVC115W,

NVC115WA, NVC215W, NVC215WA, NVC220WC,

WDC115WA, WDC215WA units only) (Fig. B)

u Make sure that the appliance is switched off. The battery

will not be charged with the on/off switch (1) pressed.

u Place the appliance on the charging bracket (4).

u Plug in the charger. Switch on at the mains.

u Leave the appliance to charge for at least 21 hours.

While charging, the charger may become warm. This is

normal and does not indicate a problem. The appliance can

be left connected to the charger indenitely.

Warning! Do not charge the battery at ambient temperatures

below 10 °C or above 40 °C.

Charging the battery via charger jack plug

(NVC115JL unit only) (Fig. B1)

u Make sure that the appliance is switched off. The battery

will not be charged with the on/off switch (1) pressed.

u Insert the charger jack plug (4a) into the charging port

(4b).

u Plug in the charger. Switch on at the mains.

u The LED indicator wiil light up.

u Leave the appliance to charge for at least 21 hours.

While charging, the charger may become warm. This is

normal and does not indicate a problem. The appliance can

be left connected to the charger indenitely.

Warning! Do not charge the battery at ambient temperatures

below 10 °C or above 40 °C.

Switching on and off (g. E)

u To switch the appliance on, press and hold the on/off

switch (1).

u To switch the appliance off, release on/off switch (1).

Dry pick up (NVC units Only)

u For everyday spills of dry material.

Warning! Never pick up wet applications with these units.

Wet and dry pick up (WDC units Only)

u For everyday spills of dry material, use your appliance

without the squeegee accessory.

Warning! Your product is designed for light spills only.

u This appliance can also be used to pick up everyday liquid

spills. Use the squeegee accessory on non-absorbent,

hard surfaces. On absorbent surfaces, such as carpet,

your appliance will pick up wet spills better without the

accessory.

u For best performance on hard surface wet pickups, insert

squeegee into the bowl nozzle opening.

u For best results when using this accessory, hold the appli-

ance at an angle of 45° and pull it slowly towards you.

u Do not ll the bowl beyond the end of the intake chute. If

there is any liquid in the bowl, do not turn the unit upside

down, sideways, point the nozzle upward, or shake the

vac excessively.

u After picking up liquid substances clean the appliance and

lter immediately. Mold and mildew may form if the unit is

not properly cleaned after wet pickups.

u Before charging, be sure to empty all liquid contents and

dry thoroughly, to avoid damage to your appliance.

Optimising the suction force

In order to keep the suction force optimised, the lters must be

cleared regularly during use.

Emptying and cleaning the product

Removing the dust bowl and lters (g. F & G).

Warning! The lters are re-usable and should be cleaned

regularly.

u Press the bowl release button (2) and pull the dust bowl

(3) straight off.

u While holding the dust bowl over a bin or sink, pull out the

lter to empty the contents of the bowl.

u To replace the dust bowl, place it back onto the handle

until it “clicks” rmly into position.

Warning! Never use the appliance without the lters. Opti-

mum dust collection will only be achieved with clean lters.

Foam insert (g. H) (WDC units Only)

u Place the foam insert (12) into the centre of the wet/dry

deector (13).

Warning! Never use the appliance for wet applications without

the water deector and foam insert tted.

Pre-lter (g. I) (NVC units Only)

The Filter and pre-lter can be separated to allow better

cleaning.

u Twist the pre-lter (11) in an anti-clockwise direction and

lift from the lter (10).

Warning! Never pick up wet applications with these units.

Cleaning the dust bowls and lters

u The dust bowls and lters can be washed in warm soapy

water.

u Make sure that the lters and the dust bowl are dry before

re-tting.

Replacing the lters

The lters should be replaced every 6 to 9 months and when-

ever worn or damaged.

Replacement lters are available from your BLACK+DECKER

dealer:

Maintenance

Your BLACK+DECKER corded/cordless appliance/tool has

been designed to operate over a long period of time with a

minimum of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance on corded/

cordless power tools:

u Switch off and unplug the appliance/tool.

u Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.

u Or run the battery down completely if it is integral and then

switch off.

u Unplug the charger before cleaning it. Your charger does

not require any maintenance apart from regular cleaning.

SSC-040015EU/

S003DV0500015

S003AQ 15

SSC-080015EU/

S003BEV0800015

S003AQ 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker NVC115W in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker NVC115W Manual

Product: