665807

Black Decker MTSS11 Manual

13
Zoom out
Zoom in
Previous page
1/124
Next page
13
ENGLISH
(Original instructions)
u Hold the tool as shown in g. C. Keep your
other hand well away from the blade. Maintain
a stable working position so that you do not
slip. Do not overreach.
u When cutting long grass, work in stages from
the top. Take small cuts.
u Keep the tool away from hard objects and
delicate plants.
u If the tool starts running slowly, reduce the
load.
u To make a closer cut, slightly tilt the tool.
Trimming hedges
u Slightly tilt the tool (up to 15° relative to the
line of cut) so that the blade tips point slightly
towards the hedge (g. D). This will cause the
blades to cut more effectively.
u Start by trimming the top of the hedge. Hold
the tool at the desired angle and move it stead-
ily along the line of cut (g. E). The double-
sided blade allows you to cut in either direction.
u In order to obtain a very straight cut, stretch a
piece of string along the length of the hedge
at the desired height. Use the string as a
guideline, cutting just above it.
u In order to obtain at sides, cut upwards with
the growth. Younger stems move outwards
when the blade cuts downwards, causing shal-
low patches in the hedge.
u Take care to avoid any foreign objects.
Especially avoid hard objects such as metal
wire and railings, as these could damage the
blades.
u Regularly oil the blades.
Guidelines for trimming (UK & Ireland)
u Trim hedges and shrubs with seasonal leaves
(new leaves every year) in June and October.
u Trim evergreens in April and August.
u Trim conifers and other fast growing shrubs
every six weeks from May until October.
Guidelines for trimming (Australia & New
Zealand)
u Trim hedges and shrubs with seasonal leaves
(new leaves every year) in December and
March.
u Trim evergreens in September and February.
u Trim conifers and other fast growing shrubs
every six weeks from October until March.
Technical data
MTSS11
(14.4V) (H1)
MTSS11
(Max) (H1)
No-load speed
min
-1
2,300 2,800
Blade length (shear)
cm 10 10
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker MTSS11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker MTSS11 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info