578616
7
Zoom out
Zoom in
Previous page
1/12
Next page
7
Sanding
Do not exert too much pressure on the tool.
Regularly check the condition of the sanding sheet.
Replace when necessary.
When sanding new layers of paint before applying
another layer, use extra fine grit.
On very uneven surfaces, or when removing layers of
paint, start with a coarse grit. On other surfaces,
start with a medium grit. In both cases, gradually change
to a fine grit for a smooth finish.
Use the abrasive pad for removing rust.
Consult your retailer for more information on available
accessories for sanding, polishing, stripping and scrubbing.
Preparation
Choose the correct type of blade for the application. Use
the claw blade for loose or flaking paint. Use the flexible
blade for soft materials. Use the rigid blade for hard materials.
Push or pull the blade steadily over the surface material.
Note that the blade will not move until it is pressed
against the material.
Do not exert too much pressure on the tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
MT3000K
Voltage V
AC
230
Power input W 80
Screwdriver:
No-load speed min
-1
250
Bit holder mm 6.35 hex
Max. drilling capacity in steel/wood mm 4.0-6.0
Sander:
Oscillations (no load) min
-1
8,500
Preparation:
Strokes (no load) min
-1
8,500
Weight
with screwdriver head kg 1.3
with sander head kg 1.25
with preparation head kg 1.25
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker MT3000K T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker MT3000K T1 in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker MT3000K T1

Black Decker MT3000K T1 User Manual - English, German, Dutch, Danish, French, Italian - 72 pages

Black Decker MT3000K T1 User Manual - Polish - 12 pages

Black Decker MT3000K T1 User Manual - Portuguese, Swedish, Spanish, Norwegian, Finnish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info