Manual Black Decker LZR5 T1 (page 4 of 44) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

578021

Zoom out

Zoom in

1/44

ENGLISH

The larger battery terminal connects to the smaller

connector terminal.

◆ Insert the battery into the tool in the orientation as shown.

◆ Refit the cover and let it click into place.

Fitting and removing inserts

The marking/hanging insert is used to make a mark on the

level line or to hang the tool on a drywall board using the

drywall pin supplied. The keyhole insert is used to hang the

tool on other types of wall using a screw or nail.

Fitting

◆ Place the insert into the holder from the back of the tool.

◆ Align the notches on the insert with the recesses in the

insert holder.

◆ Let the insert click into place.

Removing

◆ Keep the notches on the insert depressed.

◆ Push the insert out of the holder.

Wall mounting (fig. B)

The unit can be mounted to walls using one of the inserts

(4 or 5).

Hanging insert

The hanging insert (4) can be used for mounting to drywall

surfaces only.

◆ Mount the insert to the tool.

◆ Remove the protective cap (7) from the pin (8) and store it

on the insert as shown (fig. B).

◆ Hold the unit in front of a suitable location and press the

pin straight into the wall.

Warning! The pin of the insert is sharp and should be handled

with care. Replace the protective cap immediately after

removing the insert from the wall.

Keyhole insert

For surfaces other than drywall, the keyhole insert (5) can be

used with a screw in a predrilled hole.

◆ Mount the insert to the tool.

◆ Hang the unit on a screw mounted on a suitable location.

Use

Using the laser level function (fig. C)

Using the laser in auto-leveling mode

◆ Place the tool flat against the wall.

◆ Push the on/off switch (1) up to switch the tool on in

auto-leveling mode.

◆ Move the tool as necessary to position the laser line.

◆ If necessary, hang the unit on the wall using the

appropriate insert.

Note: the laser lines will only be level if the tool is kept within

5° from vertical.

Using the laser in locked/layout mode

When operating in the locked/layout mode, the tool can be

held in any position, e.g. to project slope lines.

◆ Place the tool flat against the wall.

◆ Push the on/off switch (1) down to switch the tool on in

locked/layout mode.

◆ Move the tool as necessary to position the laser line.

◆ If necessary, hang the unit on the wall using the

appropriate insert.

Hints for optimum use

◆ If because of the lighting conditions it is difficult to see

the laser line, or if the laser line has to be transferred

over long distances, you can use the marking target (6) to

enhance laser line (fig. D).

Protecting the environment

Tools

Should you find one day that your tool needs

replacement, or if it is of no further use to you, think

of the protection of the environment. Black & Decker

repair agents will accept old Black & Decker tools

and ensure that they are disposed of in an

environmentally safe way.

Battery

If you want to dispose of the tool yourself, the

battery must be removed as described above and

disposed of in accordance with local regulations.

◆ Place the battery in a suitable packaging to ensure that

the terminals cannot be short-circuited. Take the batteries

to a local recycling station.

Technical data

LZR5

Voltage V 9

Battery size 6LR61

Laser class 2

Operating temperature °C 0 - 40

Weight kg 0.3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker LZR5 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker LZR5 T1 Manual

Product: