Manual Black Decker LZR4 TH1 (page 4 of 52) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

578020

Zoom out

Zoom in

1/52

ENGLISH

(Original instructions)

u An exposure of the eye to the beam of a class 2 laser is

considered safe for a maximum of 0.25 seconds. Eyelid

reexes will normally provide adequate protection. At

distances over 1 m, the laser complies with class 1 and

thus is considered completely safe.

u Never look into the laser beam directly and intentionally.

u Do not use optical tools to view the laser beam.

u Do not set up the tool at a position where the laser beam

can cross any person at head height.

u Do not let children come near the laser.

Warning! This tool is intended for indoor use only. Do not use

the tool for outdoor applications.

Residual risks.

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

u Injuries caused by touching any moving parts.

u Injuries caused by touching any hot parts.

u Injuries caused when changing any parts or accessories.

u Injuries caused by prolonged use of the appliance. When

using any appliance for prolonged periods ensure you take

regular breaks.

Safety of others

u This appliance is not intended for use by persons (includ-

ing children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concern-

ing use of the appliance by a person responsible for their

safety.

u Children should be supervised to ensure that they do not

play with the appliance.

Features

This appliance includes some or all of the following features.

1. On/off switch

2. Operating mode selector

3. Laser aperture

4. Battery cover

Fig. A

5. Tripod

6. Hanging strap

Assembly

Warning! Make sure that the tool is switched off.

Fitting the battery (g. B)

u Remove the battery cover (4) from the tool.

u Connect the battery to the connector. The larger battery

terminal connects to the smaller connector terminal.

u Ret the cover and let it click into place.

Installing the tool (g. A, C & D)

The tool can be installed on a horizontal surface such as

a oor or a table. Alternatively, the tool can be mounted on

the tripod (5). The tool can also be hung from a joist or other

secure structure using the hanging strap (6).

Note: the laser lines will only be level if the tool is kept within

5° from vertical.

Mounting the tool on the tripod (g. C)

u Align the threaded screw (8) on the tripod with the laser.

u Screw the laser to the tripod and make sure that it is

secure.

u To remove the tool, unscrew the laser from the tripod.

Hanging the tool (g. A & D)

u Thread the hanging strap (6) through the slot in the top of

the tool and fasten the hook.

u Adjust the tool so that it hangs relatively level.

Installing and adjusting the tripod (g. A & E)

Installing

u Choose a smooth and level surface to install the tripod.

u Flip open the lever locks (7) (g. A) and extend the legs to

the required length.

u Flip the lever locks closed to lock the legs.

u Mount the tool to the tripod.

Adjusting

u Loosen the locking knob (10) (g. E).

u Pull out the fold-away handle (9) and rotate it until the

required height is reached.

u Tighten the locking knob (10) to secure the tripod at the

adjusted height.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker LZR4 TH1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker LZR4 TH1

Black Decker LZR4 TH1 User Manual - Polish - 12 pages

Black Decker LZR4 TH1 User Manual - Turkish - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker LZR4 TH1 Manual

Product: