577929

Black Decker KX200K T3 Manual

6
Zoom out
Zoom in
Previous page
1/72
Next page
6
ENGLISH
(Original instructions)
u Use a medium temperature setting for welding plastics,
bending plastic pipes, and loosening tight nuts and
screws.
u Use a high temperature setting for removing paints and
lacquers, and soldering plumbing joints.
u If you are unsure about using this tool on a particular
material, start with a low temperature setting and perform
a test on scrap material.
Hands free use (g. B)
The tool has stand locations (4) to facilitate hands free use.
u Place the tool with the nozzle up on a surface where it
cannot be tipped over.
u Secure the cable to prevent pulling the tool over.
Warning! Always point the tool away from yourself or other
persons. Do not touch the nozzle. Take care that no material
drops into the nozzle.
Paint stripping
u Direct the hot air at the working area to heat up the paint.
u Do not burn the paint. Keep the nozzle at least 25 mm
from the surface.
u When the paint softens, remove the paint using a scraper.
Scrape the softened paint immediately or it will harden
again.
u Scrape with the grain of the wood wherever possible.
u Do not allow paint and debris to collect on the scraper.
u When scraping from a vertical position, scrape downwards
to prevent the paint from falling back into the nozzle.
u When stripping paint from a surface next to glass, take the
necessary measures to protect the glass from the heat.
Warning! Use a glass protector nozzle when stripping paint
from metal or wood framed windows.
u Dispose of all paint debris safely and make sure that the
work area is thoroughly clean after use.
Cooling down
During use, the nozzle of the tool becomes extremely hot.
After switching off, leave the tool to cool down for at least 30
minutes.
u Place the tool with the nozzle up on a surface where it
cannot be tipped over.
u To speed up the cooling time, run the tool on a low
minimum temperature setting for a few minutes before
switching off.
Maintenance
Your Black & Decker appliance has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper care
and regular cleaning of the appliance.
Warning! Switch off and unplug the appliance and allow it to
cool down before doing any maintenance on the appliance.
u Regularly clean the ventilation slots in your appliance
using a soft brush or dry cloth.
u To clean the appliance, use only mild soap and a damp
cloth. Do not use any abrasive or solvent-based cleaner.
Never let any liquid get inside the appliance and never
immerse any part of the appliance into liquid.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
u Safely dispose of the old plug.
u Connect the brown lead to the live terminal in the new
plug.
u Connect the blue lead to the neutral terminal.
u Connect the green/yellow lead to the earth terminal.
Warning! Follow the tting instructions supplied with good
quality plugs. Recommended fuse: 13 A.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you nd one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environ-
mental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker ofce at
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KX200K T3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KX200K T3 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info