Manual Black Decker KX1693 T1 (page 6 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

577926

Zoom out

Zoom in

1/76

ENGLISH

Labels

Electrical safety

X If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Extension cables

X A 2 or 3 core cable may be used as the appliance is

double insulated and of class II construction.

X Up to 30m (100 ft) can be used without loss of power.

Features

1. Nozzle

2. Air inlet holes

3. Pivot handle unlock button

4. Heat setting switch (on/off)

5. Hanging hook

6. Stand

7. Heat guard

fig. A

10. Black & Decker nozzle

fig. G - J

12. Fish tail nozzle

13. Glass protection nozzle

14. Spoon reflector nozzle

15. Cone nozzle

16. Manual scraper

Assembly (fig. A and B)

Warning! Before assembly, make sure that the appliance is

switched off and unplugged.

Warning! Make sure that the appliance is switched off and

cool before fitting or removing the accessories.

Your heat gun is supplied with an integrated Black & Decker

scraper.

X Align the slot of the scraper blade (9) with the protrusion

on the blade holder (10) and position under the retaining

screw (8).

Note: Make sure that the hole in the scraper (9) is to the left

of the screw (8) in the blade holder (10).

X Tighten the retaining screw (8).

X Place the blade holder (10) over the nozzle outlet (1).

Make sure that it is aligned; the small bump on the

inside of the blade holder (10) engages with the recess

on the nozzle.

X Tighten the blade holder clamp screw (11).

Your heat gun (KX1693 only) is also supplied with the

following four nozzles. For best results it is recommended

that nozzles are always used.

Fish tail nozzle (12) - Ideal for removing paint or varnish

from large flat surfaces.

Cone nozzle (15) - Concentrates the air stream on a smaller,

more concentrated area.

Spoon reflector nozzle (14) - disperses the air evenly

around the whole object.

Glass protector nozzle (13) - for the protection of glass

during paint stripping.

X Fit the connecting piece of the accessory over the

nozzle (1).

Your appliance is also supplied with a manual scraper for

stripping paint and varnish.

Dual position handle (fig. C)

Your appliance is a highly versatile heat gun with a dual

position handle which can be used comfortably for many

different applications. It is designed to be used in either pistol

grip mode (a) or in-line mode (b).

X To switch between positions hold down the handle

unlock button (3) and rotate the handle 180 degrees.

Use

Operating your heat gun (fig. D)

X To turn the heat gun on, push the heat setting switch (4)

forward to the 1, 2 or 3 position (position 3 is on the

KX1693 only).

Note: The position numbers represent the heat settings

described in the technical data table at the end of the

manual.

X To switch your heat gun off, pull the heat setting switch

(4) back to reveal the off (O) position.

Using the appliance

X Allow the appliance to heat up for a few seconds before

use.

Note: At first use some smoke may emit from the nozzle.

This is normal and will soon decrease.

X Low - use a low temperature setting for drying paint and

varnish, removing stickers, shrinking insulation tubes,

and thawing frozen pipes.

Read all of this manual carefully before using your

appliance.

This product is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KX1693 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KX1693 T1

Black Decker KX1693 T1 User Manual - Polish - 12 pages

Black Decker KX1693 T1 User Manual - Turkish - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker KX1693 T1 Manual

Product: