577910
8
Zoom out
Zoom in
Previous page
1/12
Next page
8
FINE ADJUSTMENT WITH THE TRIPLE DEPTH STOP
After turning the
triple depth stop,
fine adjustment is
made with a
screwdriver on
the appropriate
screw. When you
wish to make
several cuts at
different depths in the same material, adjust the three
screws on the triple depth stop accordingly.
FITTING THE EDGE GUIDE
The edge guide is used when making parallel cuts or
when making decorative edges.
Insert two screws
provided in the
end holes in the
edge guide and
screw them into
the threaded ends
of the two bars.
Insert the two
bars in the grooves
in the base of your router. Adjust the guide to give the
desired distance and tighten the two wing screws.
ALTERNATIVE GUIDE METHOD
When it is not
possible to use an
edge guide, (such
as when routing
grooves to
support shelves in
a bookcase end),
use a straight
piece of wood
clamped across the workpiece to act as a guiding edge.
FITTING THE VACUUM ADAPTOR
The vacuum adaptor enables the connection of a vacuum
cleaner to your router to keep the workplace clean.
Locate the
vacuum adaptor
on the base of
your router. Insert
the two long
screws provided,
from the bottom of
the holes; place
two nuts on top of the adaptor and tighten the screws.
FITTING THE TEMPLATE GUIDE
Use this guide to
make a cutout
shape from a
template. The
template is
secured over the
workpiece using
double-sided tape
or ‘G’ clamps. The
router bit extends below the template guide, to cut
the workpiece in the shape of the template. In this
way, a number of workpieces are made accurately to
the same shape.
To fit the template
guide, secure it to
the base of your
router using the
two long screws
provided.
ELECTRONIC SPEED REGULATION (KW800E)
The electronic
speed switch
permits the
setting of the
optimum speed to
suit the router bit
diameter and the
material of the
workpiece. This
reduces the risk
of burning the workpiece, especially when crosscutting.
USING THE DISTANCE PIECE
The distance
piece is used
when trimming
wooden or
laminate vertical
projections.
Attach the
distance piece to
the base using
the screws
provided.
ENGLISH
56
4
3
2
1
7
8
9
10
KW800_E UK p01-12 16-01-2001, 13:128
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KW800 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KW800 T1 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KW800 T1

Black Decker KW800 T1 User Manual - German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian, Finnish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info