581129
4
Zoom out
Zoom in
Previous page
1/56
Next page
4
ENGLISH
d. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g. Use the power tool, accessories and
tool bits etc., in accordance with these
instructions and in the manner intended
for the particular type of power tool, taking
into account the working conditions and
the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
5. Service
a. Have your power tool serviced by
a qualifi ed repair person using only
identical replacement parts. This will ensure
that the safety of the power tool is maintained.
Electrical safety
This tool is double insulated; therefore
no earth wire is required. Always check
that the power supply corresponds to the
voltage on the rating plate.
Additional safety instructions for jigsaws
Warning! Contact with or inhalation of dusts
arising from cutting applications may endanger
the health of the operator and possible
bystanders. Wear a dust mask specifi cally
designed for protection against dust and fumes
and ensure that persons within or entering the
work area are also protected.
Features
This tool includes some or all of the following
features.
1. On/off switch
2. Lock-on button
3. Variable speed control knob
4. Turbo selector
5. Saw blade locking lever
6. Saw blade support roller
7. Saw blade
8. Shoe plate
9. Shoe plate locking knob
10. Saw blade storage compartment
11. Dust extraction adaptor
Assembly
Warning! Before attempting any of the following
operations, make sure that the tool is switched
off and unplugged and that the saw blade has
stopped. Used saw blades can be hot.
Fitting the saw blade (fi g. A)
Hold the saw blade (7) as shown, with the teeth
facing forward.
Push the lever (5) downwards.
Insert the shank of the saw blade into the blade
holder (12) as far as it will go.
• Release the lever.
Connecting a vacuum cleaner to the tool (fi g.
B & C)
Align the dust extraction adaptor (11) with the
saw shoe as shown.
Insert the ribs (14) into the slots (15).
Rotate the adaptor until it locks into position.
Make sure that the ribs (16) are correctly
seated.
Connect the vacuum cleaner hose (13) (not
supplied) to the adaptor.
Dust extraction is not possible when making bevel
cuts.
Use
Warning! Never use the tool when the saw shoe is
loose or removed.
Adjusting the shoe plate for bevel cuts (fi g. D)
The shoe plate can be set to a left or right bevel
angle of up to 45°.
Turn the locking knob (9) in direction A to
release the shoe plate (8).
Pull the shoe plate (8) backwards and set it to
the required angle. You can use the scale or
a protractor to check the angle.
Turn the locking knob (9) in direction B to lock
the shoe plate in place.
To reset the shoe plate for straight cuts:
Turn the locking knob (9) in direction A to
release the shoe plate (8).
Pull the shoe plate backwards and set it to an
angle of approx. 0°.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KS999EK T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS999EK T1 in the language / languages: Polish as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KS999EK T1

Black Decker KS999EK T1 Quick start guide - English - 8 pages

Black Decker KS999EK T1 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish - 52 pages

Black Decker KS999EK T1 User Manual - Turkish - 8 pages

Black Decker KS999EK T1 User Manual - Spanish, Spanish, Norwegian, Finnish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info