Manual Black Decker KS950SLW T1 (page 9 of 88) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

581126

Zoom out

Zoom in

1/88

ENGLISH

will gradually return to normal when the tool cools down even

when the tool is unplugged.

Warning! Do not leave the overheated laser switched ON.

Make sure that the switch is in the OFF position and remove

the batteries to remove power from the laser.

Using the laser (fig. J and K)

The laser projects the line of cut (18) on to the surface of the

workpiece.

X To switch the laser on, press the button (16).

X To switch the laser off, press the button (16) again.

Viewing from directly above the jigsaw, the line of cut (17)

can be easily followed. Should this view be restricted for any

reason, the laser can be used as an alternative cutting guide.

X Use a pencil to mark the cutting line (17).

X Position the jigsaw over the line (17).

X Switch on the laser.

Operating the work light (fig. L and M) ('W' units only)

Units that include a 'W' in the catalogue number are provided

with an LED light (19) to illuminate the area around the

blade.

X To switch the work light on, slide the switch (20) to the on

position (I).

X To switch the work light off, slide the switch (20) to the

off position (0).

Hints for optimum use

Sawing laminates

When cutting laminates, splintering may occur which can

damage the presentation surface. The most common saw

blades cut on the upward stroke, therefore if the shoe plate

is sitting on the presentation surface either use a saw blade

that cuts on the downward stroke or:

X Use a fine-tooth saw blade.

X Saw from the back surface of the workpiece.

X To minimise splintering, clamp a piece of scrap wood or

hardboard to both sides of the workpiece and saw through

this sandwich.

Sawing metal

Be aware that sawing metal takes much more time than

sawing wood.

X Use a saw blade suitable for sawing metal.

X When cutting thin sheet metal, clamp a piece of scrap wood

to the back surface of the workpiece and cut through this

sandwich.

X Spread a film of oil along the intended line of cut.

Maintenance

Your Black & Decker tool has been designed to operate over

a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

X Regularly clean the ventilation slots in your tool using a soft

brush or dry cloth.

X Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner. Never let

any liquid get inside the tool and never immerse any part of

the tool into liquid.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your tool needs

replacement, or if it is of no further use to you,

think of the protection of the environment. Black

& Decker repair agents will accept old Black &

Decker tools and ensure that they are disposed

of in an environmentally safe way.

Separate collection of used products and

packaging allows materials to be recycled and

used again. Re-use of recycled materials helps

prevent environmental pollution and reduces the

demand for raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have

reached the end of their working life. To take advantage of

this service please return your product to any authorised

repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker office at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of

our after-sales service and contacts are available on the

Internet at: www.2helpU.com.

At the end of their useful life, discard batteries with

due care for our environment. Remove the

batteries as described above.

X Place the batteries in suitable packaging to ensure that the

terminals cannot be short-circuited.

X Take the batteries to a local recycling station.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS950SLW T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KS950SLW T1

Black Decker KS950SLW T1 Quick start guide - English - 12 pages

Black Decker KS950SLW T1 User Manual - Polish - 16 pages

Black Decker KS950SLW T1 User Manual - Turkish - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker KS950SLW T1 Manual

Product: