581116
58
Zoom out
Zoom in
Previous page
1/104
Next page
www.blackanddecker.eu
KS900S
KS900SL
KS950SL
2
English (Original instructions) 6
Deutsch (Übersetzung der ursprünglichen Anweisungen) 14
Français (Traduction des instructions initiales) 22
Italiano (Traduzione del testo originale) 30
Nederlands (Vertaling van de originele instructies) 38
Español (Traducción de las instrucciones originales) 46
Português (Tradução das instruções originais) 54
Svenska (Översättning av originalanvisningarna) 62
Norsk (Oversettelse av de opprinnelige instruksjonene) 69
Dansk (Oversættelse af de oprindelige instruktioner) 76
Suomi (Alkuperäisten ohjeiden käännös) 83
Ελληνικά (Μετάφραση των πρωτότυπων οδηγιών)90
3
4
5
6
ENGLISH
English
Intended use
Your Black & Decker jigsaw has been designed for sawing
wood, plastics and metal. This tool is intended for consumer
use only.
Safety instructions
General power tool safety warnings
Warning! Read all safety warnings and all
instructions. Failure to follow all instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below
refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
f. If operating a power tool in a damp location is
unavoidable, use a Residual Current Device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
b. Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on
invites accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
e. Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or
the
battery p
ack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
!
7
ENGLISH
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5. Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
make sure that the safety of the power tool is maintained.
Additional power tool safety warnings
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding
the work by hand or against your body leaves it unstable
and may lead to loss of control.
Keep hands away from cutting area. Never reach
underneath the work piece any reason. Do not insert
fingers or thumb into the vicinity of the reciprocating
blade and blade clamp. Do not stabilize the saw by
gripping the shoe.
Keep blades sharp. Dull or damaged blades may
cause the saw to swerve or stall under pressure. Always
use the appropriate type of saw blade for the workpiece
material and type of cut.
When cutting pipe or conduit, make sure that they
are free from water, electrical wiring, etc.
Do not touch the workpiece or the blade
immediately after operating the tool. They can
become very hot.
Be aware of hidden hazards, before cutting into
walls, floors or ceilings, check for the location of
wiring and pipes.
The blade will continue to move after releasing the
switch. Always switch the tool off and wait for the saw
blade to come to a complete standstill before putting the
tool down.
Warning! Contact with, or inhalation of dusts arising from
cutting applications may endanger the health of the operator
and possible bystanders. Wear a dust mask specifically
designed for protection against dust and fumes and ensure
that persons within or entering the work area are also
protected.
The intended use is described in this instruction manual.
The use of any accessory or attachment or performance
of any operation with this tool other than those
recommended in this instruction manual may present a
risk of personal injury and/or damage to property.
Safety of others
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a
person responsible for the their safety.
Children should be supervised to ensure that they do
not play with the appliance.
Vibration
The declared vibration emission values stated in the
technical data and the declaration of conformity have been
measured in accordance with a standard test method
provided by EN 60745 and may be used for comparing one
tool with another. The declared vibration emission value may
also be used in a preliminary assessment of exposure.
Warning! The vibration emission value during actual use of
the power tool can differ from the declared value depending
on the ways in which the tool is used. The vibration level may
increase above the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons
regularly using power tools in employment, an estimation of
vibration exposure should consider, the actual conditions of
use and the way the tool is used, including taking account of
all parts of the operating cycle such as the times when the
Warning! Additional safety warnings for jigsaws.
!
58
PORTUGUÊS
Como utilizar o mostrador Auto Select
TM
(fig. G)
Esta ferramenta possui um Mostrador Auto Select
TM
(8) para definir a velocidade e a acção pendular da lâmina para várias
aplicações de corte. Para seleccionar a velocidade mais adequada e a acção pendular da lâmina para o tipo de material a
ser cortado, rode o mostrador (8) conforme indicado na tabela seguinte:
Ligar e desligar (fig. P)
Para ligar a ferramenta, prima o interruptor ligar/desligar
(2).
Para desligar a ferramenta, solte o interruptor ligar/desligar
(2).
Para um funcionamento contínuo, pressione o botão de
bloqueio (1) e solte o interruptor ligar/desligar (2).
Para desligar a ferramenta em funcionamento contínuo,
pressione o interruptor ligar/desligar (2) e solte-o.
Serrar
Segure firmemente a ferramenta com ambas as mãos
enquanto corta.
O arrasto (7) deve ser segurado com firmeza contra o
material a ser cortado. Isto irá evitar que a serra salte, reduz
a vibração e minimiza a quebra da lâmina.
Deixe a lâmina a trabalhar livremente durante alguns
segundos antes de começar a cortar.
Exerça um ligeira pressão na ferramenta enquanto corta.
Trabalhar com o laser (fig. H - K) (apenas unidades ‘L’)
Colocar as pilhas (fig. H)
Solte o módulo laser (14) da serra eléctrica, removendo o
parafuso (13) e puxando o módulo laser para a frente. Insira
duas novas pilhas alcalinas AAA de 1,5 Volts, certificando-
se de que coloca correctamente os terminais (+) e (-). Ligue
novamente o módulo laser (14).
Ajustar o laser paralelamente (fig. I)
Nota: O laser é um auxiliar de corte e não garante um corte
preciso.
Advertência! Não ajuste o laser com a serra eléctrica ligada.
Utilize o parafuso de regulação do laser (15) para alinhar a
risca de laser com a lâmina de serra, caso seja necessário.
A visibilidade do laser (potência) será reduzida se se
verificar um sobreaquecimento na serra eléctrica. O laser
poderá não ser visível quando a serra estiver
sobrecarregada durante um período de tempo prolongado.
A visibilidade do laser regressará gradualmente ao normal
Ícone Aplicação
Velocidade/Acção
pendular
Tipo de Lâmina
Superfícies de trabalho
de cozinhas,
superfícies de
trabalho, placas
laminadas
Rápido, Sem acção
pendular
Madeira normal
Deslocamento/curvas/
artesanato, madeiras
duras, coberturas,
pavimentos
Rápido, Sem acção
pendular
Madeira para
desenrolar
Madeira normal
Contraplacado e
painéis de madeira
Rápido, acção
pendular média
Madeira normal
Madeira normal,
madeira macia, corte
rápido
Rápido, acção
pendular máxima
Madeira normal
Plásticos, Perspex,
PVC
Velocidade média,
acção pendular
média
Objectivo geral
Folha-de-flandres
metálica, azulejos,
chapa de fibra de vidro
Baixa velocidade,
Sem acção pendular
Lâmina de metal,
cerâmica ou de
fibra de vidro
Lento, arranque de
precisão
Lento, Sem acção
pendular
Escolha a lâmina
correcta para a
aplicação
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KS900SK T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS900SK T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KS900SK T1

Black Decker KS900SK T1 Quick start guide - English - 16 pages

Black Decker KS900SK T1 User Manual - Polish, Turkish - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info