Manual Black Decker KS890GT T1 (page 6 of 72) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

581151

Zoom out

Zoom in

1/72

ENGLISH

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

Labels on tool

The following pictograms are shown on the tool:

Warning! To reduce the risk of injury, the user must

read the instruction manual.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Variable speed switch

2. Lock-off button

3. Blade release button

Fig. A

4. Large capacity blade

5. Curve cutting blade

6. Metal cutting blade

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fittingandremovingasawblade(g.B&C)

Fitting

u Place the blade over the location pin (7).

u Rotate the blade upward through 90° until it is fully located

in the saw blade slot (8) and the location pin is in the

locked position.

u Make sure the blade is securely tted by trying to remove

it without depressing the blade release button (3).

If you are unable to t the blade, check if the location pin is in

the correct position as shown in g. C. If it is not, keep the

blade release button depressed and use a screwdriver to turn

the location pin into the correct position.

Removing

u Keep the blade release button (3) depressed and rotate

the blade downward through 90°.

u Take the blade sideways off the location pin and slide it

out of the tool.

u Release the blade release button.

Use

Warning! Let the tool work at its own pace. Do not overload.

Switchingonandoff(g.D)

u To switch the tool on, push the two lock-off buttons (2) into

the unlock position and press the variable speed switch (1).

u To switch the tool off, release the variable speed switch.

Sawing(g.E)

u If possible, always hold the tool with both hands.

u Let the blade run freely for a few seconds before starting

the cut.

u Apply only a gentle pressure to the tool while performing

the cut.

u Use the same back and forth movement you would

employ with a normal hand saw. This enables a quicker

and cleaner cut.

Hints for optimum use

Sawing wood

u Clamp the workpiece securely and remove all nails and

metal objects.

u When splintering is to be minimised, e.g. when cutting

laminates, clamp a piece of scrap wood or hardboard to

both sides of the workpiece and saw through this sandwich.

Sawing metal

u Be aware that sawing metal takes much more time than

sawing wood.

u Use a saw blade suitable for sawing metal. Use a ne-

tooth saw blade for ferrous metals and a coarser saw

blade for nonferrous metals.

u When cutting thin sheet metal, clamp a piece of scrap

wood to the back surface of the workpiece and cut through

this sandwich.

u Spread a lm of oil along the intended line of cut.

Cutting branches

u Cut downward and away from your body.

u Make the cut close to the main branch or tree body.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS890GT T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KS890GT T1

Black Decker KS890GT T1 Quick start guide - English - 12 pages

Black Decker KS890GT T1 User Manual - Polish - 12 pages

Black Decker KS890GT T1 User Manual - Turkish - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker KS890GT T1 Manual

Product: