Manual Black Decker KS890E T1 (page 6 of 64) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

581147

Zoom out

Zoom in

1/64

ENGLISH

Always ensure the unit is unplugged from the power

supply when changing blades.

Always ensure the tooth protector is fitted when

changing blades.

REMOVING THE BLADE

Ensure blade has cooled

after use. Press and hold

the rear of the blade

release button fully, hold

the back of the blade

and rotate the blade

through 90° as shown in

the diagram. Slide the

blade sideways off the

retaining pin and remove

from the saw.

FITTING A BLADE

Place the blade with the

tooth protector fitted

over the location pin.

The blade teeth should

be facing the handle.

Rotate the blade

through 90° until it is

fully located in the slot

and the location pin is

in the locked position.

To ensure the blade is

securely fitted try to

remove without pressing

the blade release button.

Remove the tooth

protector, your saw is

now ready for use.

Note: If you are unable to fit the blade, check if the

location pin is in the correct position as shown

below. If it is not, keep the blade release button

depressed and use a screwdriver to turn the location

pin into the correct position.

OPERATING YOUR SCORPION SAW

Variable speed trigger switch

Your Scorpion Saw is equipped with a variable speed

trigger switch that allows you greater control over

start of cut, rate of cut and breakthrough of cut.

To switch your Scorpion

Saw on, push lock-off

button (2) and squeeze

the on/off variable

speed trigger switch (1).

To switch off, release

the trigger, the unit will

automatically lock-off.

Standard Mode

To obtain the best results

from your Scorpion Saw,

use the same backward

and forward movement

you would employ with

a traditional hand saw.

This will enable a quicker cleaner cut.

Operating in Jigsaw Mode

Disconnect unit from

power supply. Remove

blade, rotate shoe

through 270˚ and secure

in position. Fit curve

cutting blade.

Remove tooth protector

and your Scorpion Saw

is now ready for use.

Cutting Metal

Your Scorpion Saw can be used for cutting light

gauge ferrous and non-ferrous metals such as

copper, brass, aluminium, etc. See recommended

materials.

It is advisable when cutting thin sheet to clamp a

backing sheet of soft wood or plywood to the work

as this will enable you to obtain a cleaner cut. Both

metal and wood backing are sawn together. Do not

force the cutting blade into the metal as this will

reduce the life of the blade and possibly damage the

motor. Cutting thin metal will take longer than cutting

even a relatively thick piece of wood, so do not be

tempted to speed up the operation by forcing the

saw. Spread a thin film of oil along the proposed

cutting line before cutting.

Only use the metal cutting blade for this purpose.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS890E T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KS890E T1

Black Decker KS890E T1 Quick start guide - English - 12 pages

Black Decker KS890E T1 User Manual - Turkish - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker KS890E T1 Manual

Product: