445763

Black Decker KS865KN Manual

29
Zoom out
Zoom in
Previous page
1/80
Next page
29
ENGLISH
it and give the blade time to pursue its path. Use the
mark (17) for straight cuts or the mark (18) for mitring
cuts, to keep to the line you have drawn.
MAINTENANCE OF THE WINDOW
From time to time, it may become necessary to remove
cutting debris/dust from the inside of your circular saw
window.
To do this, proceed as follows:
Disconnect the plug from the electricity supply.
Slide the window lever
(2) forward to expose
the soiled portion of the
window.
Take a clean, lint free
cloth and proceed to
wipe the exposed part of
the window as required.
When finished, simply slide the lever back towards the
rear of the saw guard in order to restore the window
into its operating position.
Note: If necessary, use only mild soap to clean your
saw as many household cleaners contain chemicals
which could seriously damage the plastic. Also, do not
use petrol, turpentine, laquer or paint thinners or
simular products. Never let any liquid get inside your
circular saw and never immerse any part of it into liquid.
REPLACING THE CARBON BRUSHES
Proceed as follows:
Disconnect the plug from the electricity supply.
Unscrew the brush cover (11). Withdraw the carbon
brush and holder. Remove the carbon brush from the
brush holder. Insert the new carbon brush in the brush
holder. Insert the carbon brush and brush holder in
the housing. Fit the brush covers.
Note: Replace the brushes in pairs and ensure used
brushes and brush holders are fitted in the same
positions as when removed.
SAWDUST REMOVAL
For sawdust removal,
you can use a vacuum
cleaner with a
conventional flexible
connection inserted in
the dust collection
outlet.
HANDY HINTS
Some splintering is inevitable on the topside line of cut.
It is therefore desirable to cut on the side of the
workpiece where splintering is acceptable. This is
especially important when cutting laminates.
TOOL CARE
• Guide your circular saw but do not force it through
the work. Applying excessive pressure can cause
your circular saw to overheat. If your circular saw
becomes too hot, operate it off-load for 2 minutes.
• Always keep the air cooling vents on the motor
housing clear.
EC DECLARATION OF CONFORMITY
We declare that units:
CD600, KS227, KS840, KS846N, KS850N,
KS855N, KS865N, KS865KN, 374456N
conform to 89/392/EEC, 89/336/EEC, EN55014,
73/23/EEC, EN55104, EN50144, EN61000
A weighted sound pressure 92.7dB (A)
A weighted sound power 102.1dB (A)
Hand/arm weighted vibration <2.5m/s
2
Brian Cooke - Director of Engineering
Black & Decker Ltd, Spennymoor, County Durham
DL16 6JG United Kingdom
The Black & Decker policy is one of continuous
improvement to our product and as such we reserve
the right to change the product specification without
prior notice.
CD600 Circ saw ML p01-41 07/01/2000, 3:43 pm29
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker KS865KN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker KS865KN in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker KS865KN

Black Decker KS865KN User Manual - English - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info